Using A Bluetooth Cell Phone Or Modem - Sony PCGA-BA1 Series Operating Instructions Manual

Using a Bluetooth cell phone or modem

By using Windows XP functions to connect the Bluetooth USB adapter to a
Bluetooth cell phone or modem, dial-up communication is possible without
a connecting cable.
This section describes installation of a Bluetooth cell phone or modem, and
dial-up connection setup. For operating details, refer to the manual
provided with the Bluetooth cell phone and the Windows XP Wireless Link
Help.
Setting up a Bluetooth cell phone or modem
1
Turn on the Bluetooth cell phone or modem and set it to
allow discovery.
For details, see the manual provided with the cell phone.
2
Turn on the computer and insert the Bluetooth USB adapter
into the USB port (page 14).
3
Click the "Start" button and select "Control Panel".
The Control Panel appears.
4
Click the "Printers and Other Hardware" icon.
5
Click "Wireless Link", and click the "Bluetooth" tab.
6
Click "Add", and then "Next" in the "Bluetooth Connection
Wizard" window.
Device discovery starts, and the Bluetooth cell phone is detected.
GB
20