Advertisement
A djusti n g S t e e r ing and Thrott l e T r i m s
Steering Trim
Adjust the direction wheel to center the tires. Use sub-trim (see your remote control's instruction
manual) if needed. If direction wheel is not close to its desired neutral position,and direction
wheel cannot be centered using sub-trim, please take the following steps:
Multi Function
ST .D/R
POWER
steering trim
1. Make sure transmitter steering wheel and steering trim are set to "0" or neutral.
2. Remove the servo output rocker arm using a 2.0mm hexagon wrench,exchange angle to install
the rocker arm in correct orientation.
3. Trim the steering adjust the steering wheel to the neutral position as described above.
All manuals and user guides at all-guides.com
5
Advertisement
