Environmental Temperature - Strend Pro BDG02-Z4.0A-P1 Instruction Manual

ENGLISH
EN
SMART BATTERY CHARGER FOR CARS AND MOTORCYCLES
The smart battery charger is suitable for charging all types of lead-acid batteries (WET, MF, Ca / Ca,
AGM and GEL) and LiFePO4 batteries with a voltage of 6 V and 12 V and a capacity of 4 - 120 Ah. Use
the charger only in well-ventilated areas.
Use the device only for its intended purpose. Any other use is considered a misuse. The user/operator,
not the manufacturer, shall be responsible for any damage or injury caused by such a misuse. Please
note that this machine has not been designed for commercial or industrial use. The warranty will not
be valid if the equipment is used for commercial, industrial or similar purposes.
CHARGING CURRENT
OUTPUT VOLTAGE
VOLTAGE / FREQUENCY
POWER
SUITABLE FOR BATTERY TYPES
BATTERY CAPACITY
PROTECTION CLASS
ENVIRONMENTAL
TEMPERATURE
POWER CABLE LENGTH
DIMENSIONS
Prečítajte si návod na použitie.
Do not dispose of as normal household waste. Instead, contact your recycling center in
an environmentally friendly way. Please take care of environmental protection.
The product complies with the applicable European directives and the conformity
assessment method of these directives has been implemented.
INTENDED USE
TECHNICAL PARAMETERS
All types of lead-acid batteries (WET, MF, Ca/Ca, AGM a GEL)
PARTS OF THE PRODUCT
1
2
3
4
EXPLANATION OF SYMBOLS
2 / 4 A
6 / 12 V
230 V / 50 Hz
70 W
and LiFePO4 batteries
4-120 Ah
IP65
-20°C to +40°C
1,5 m
18 x 7,8 x 4,9 cm
Mode selection button
LCD display
Connecting terminal (black) (-)
Connecting terminal (red) (+)