Save Message - Bosch GSM 1900 User Manual

How to read a message again
1. Press to enter the List menu system.
2. Select Messages
3. Select Inbox by pressing
4. Scroll through the list of messages and
confirm your choice by pressing
How to send a message
Before you can send a message you have to enter
your network operator's telephone number for
this special service. Contact your network opera-
tor to obtain this number. On page 34 you can see
how you enter this special phone number and
how to select validity period, transmission format
etc. once for all. If you do not specify these para-
meters in the Setup menu system you will be
asked for a specification each time you wish to
send a message.
1. Press to enter the List menu system.
2. Select Messages
3. Select New message
Start entering your message using the keypad in
the same way as you enter a name or a tele-
phone number in the phone book.
cursor to the left, moves the cursor to the
right. Delete unwanted characters by pressing
CLEAR
.
If you want to use the
message press the -key briefly twice.
22
MESSAGES
and press SELECT
OK
SELECT
and press SELECT
by pressing OK
moves the
-symbol in your SMS
4. End your message by pressing
5. Select whether you wish to
Send message
at once or whether you wish to

Save message

for sending it later on.
6. Confirm your choice by pressing
Having selected Send message
will ask for a phone number to send the message
to. Either enter a phone number or select one
from your phone book using
The message is automatically stored in Outbox
under Messages in the List menu system.
How to edit an old message
1. Press to enter the List menu system.
2. Select Messages
3. Select Inbox or
OK
4. Select the message you wish to edit
and confirm by pressing
5. Press OPTION
6. Select Edit message
A digit between the scroll indicators on the
display indicates the number of the individual
messages.
OK
SELECT
the phone
and press SELECT
Outbox by pressing
SELECT
and press OK