Important Safety Instructions
This printer is a high-precision electronic device. Before operation, be
sure to read the following instructions to handle the printer properly.
❏ Read the manual carefully before operation.
❏ Do not dispose of these instructions. Save them for future reference.
❏ Follow all warnings and instructions on the printer and consumables.
❏ Do not place the printer on an unstable cart, stand, or table.
❏ When installing the printer, carefully observe the location
requirements described in this guide.
❏ The shaded part of the face-up delivery area may be hot. Be careful
not to touch it.
CAUTION! HOT SURFACE AVOID CONTACT
PRECAUCION!/ATTENZIONE! ALTA TEMPERATURA
❏ Do not expose the printer to a wet environment.
❏ Do not expose the printer directly to a chemical environment
(experimental laboratories, etc.). The exterior of the printer is made of
plastic, and the outside covering might fade, become deformed, or
❏ Do not install the printer where it will be exposed to smoke or steam.
❏ Be sure to connect the printer to a grounded outlet.
❏ Do not operate the printer until all packing materials (packing tape,
spacers, and styrofoam molds) have been removed.
ATTEMTION! TEMPERATURE ELEVEE