Advertisement
11823040-02
Installation
Electrical connection
Before connecting the coffee machine,
make sure that the connection data on
the data plate (voltage and frequency)
matches that of the domestic electrical
supply.
This data must match to prevent the
coffee machine from being damaged. If
in any doubt, consult a qualified
electrician.
The necessary connection data is given
on the data plate inside your appliance.
The fuse rating must be at least 10 A.
If possible, the socket should remain
easily accessible. If the socket is no
longer accessible after installation, an
additional means of disconnection must
be provided for all poles. Suitable
means of disconnection include
switches with an all-pole contact gap of
at least 3 mm. These include circuit
breakers, fuses, and contactors
(EN 60335).
Do not connect the coffee machine to a
stand-alone inverter. Stand-alone
inverters are used for autonomous
power supply, e.g., a solar power
system. Power surges could trigger the
safety shut-off function. This can
damage the electronics.
The coffee machine must not be used
with energy-saving plugs. These
reduce the amount of energy supplied
to the appliance, causing it to overheat.
Advertisement
