Advertisement
Available languages
Available languages
Quick Links
H H
E E
D D
G G
E E
T T
R R
I I
M M
M M
E E
R R
S S
H H
E E
D D
G G
E E
T T
R R
I I
M M
M M
E E
R R
S S
INSTRUCTION MANUAL
DATE CODE
Catalog Nos. TR1400, TR1600, TR1700,
TR1800, HT2000, HT2200
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-54-HOW-TO (544-6986)
IF YOU SHOULD EXPERIENCE A PROBLEM
WITH YOUR BLACK & DECKER PRODUCT,
CALL 1-800-54-HOW-TO (544-6986)
BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No.,
TYPE No., AND DATE CODE. IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN
RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR
COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TO BLACK & DECKER.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
WARNING: IMPORTANT SAFETY WARNINGS AND INSTRUCTIONS
TO REDUCE RISK OF INJURY:
• Before any use, be sure everyone using this tool reads and understands all safety
instructions and other information contained in this manual.
• Save these instructions and review frequently prior to use and in instructing others.
WARNING: This product contains chemicals, including lead, known to the State of
California to cause cancer, and birth defects or other reproductive harm.
Wash hands after handling.
CAUTION: Wear appropriate personal hearing protection during use. Under some
conditions and duration of use, noise from this product may contribute to
hearing loss.
WARNING: When using electric gardening appliances, basic safety precautions should
always be followed to reduce risk of fire, electric shock, and personal injury, including the
following:
READ ALL INSTRUCTIONS.
GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL TOOLS
• AVOID DANGEROUS ENVIRONMENT - Don’t use hedge trimmers in damp or wet
locations.
• DON’T USE IN RAIN.
• KEEP CHILDREN AWAY - All visitors should be kept at a safe distance from the work area.
• DRESS PROPERLY - Don’t wear loose clothing or jewelry. They can be caught in moving
parts. Use of rubber gloves and substantial footwear is recommended when working
outdoors. Wear protective hair covering to contain long hair.
• USE SAFETY GLASSES - Also use face or dustmask if operation is dusty.
• GROUND FAULT CIRCUIT INTERRUPTER (GFCI) protection should be provided on the
circuit(s) or outlet(s) to be used for the hedge trimmer. Receptacles are available having
built-in GFCI protection and may be used for this measure of safety.
• USE RIGHT APPLIANCE - Do not use appliance for any job except that for which it is
intended.
WARNING: To reduce the risk of electric shock use only with an extension cord intended for
outdoor use, such as SW-A, S0W-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A or
SJTOW-A.
• EXTENSION CORD. Make sure your extension cord is in good condition. When using an
extension cord be sure it is heavy enough to carry the current your product will draw. An
undersized extension cord will cause a drop in line voltage resulting in loss of power and
overheating. The following table shows the correct size to use depending on cord length and
nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage
number, the heavier the cord.
Minimum Gage for Cord Sets
Volts
Total Length of Cord in Feet
120V
0-25
26-50
51-100 101-150
240V
0-50
51-100 101-200 201-300
Ampere Rating
More Not more
American Wire Gage
Than Than
0
-
6
18
16
16
14
6
-
10
18
16
14
12
10
-
12
16
16
14
12
12
-
16
14
12
Not Recommended
• AVOID UNINTENTIONAL STARTING - Don’t carry plugged in hedge trimmer with finger on
switch. Be sure switch is off when plugging in.
• DON’T ABUSE CORD - Never carry hedge trimmer by cord or yank it to disconnect from
receptacle. Keep cord from heat, oil, and sharp edges.
DANGER: Risk of cut. Keep hands away from blades. Keep both hands on handles when
power is on.
• DO NOT ATTEMPT to remove cut material or hold material to be cut when blades are
moving. Make sure trimmer switch is off when clearing jammed material from blades. Do not
grasp the exposed cutting blades or cutting edges when picking up or holding the hedge
trimmer.
CAUTION: Blades coast after turn off.
• DON’T FORCE HEDGE TRIMMER - It will do the job better and with less likelihood of a risk
of injury at the rate for which it was designed.
• DON’T OVERREACH - Keep proper footing and balance at all times.
• STAY ALERT - Watch what you are doing. Use common sense. Do not operate hedge
trimmer when you are tired.
• DISCONNECT HEDGE TRIMMER from the power supply when not in use or when
TR1400
TR1600
1A
HT2000
TR1700
HT2200
1
TR1800
Lock Button
Trigger
Bouton de
Gâchette
verrouillage
Interruptor
4
Botón de
de Gatillo
seguridad
2
Plug Blades
Raccordement
à fiche
Clavijas de
enchufe
5
3
6
ATTACHING EXTENSION CORD TO TRIMMER
An extension cord retainer is built into the switch handle that prevents the tool from coming
unplugged. To use this feature, simply double the extension cord about 8 inches from the
end, and insert it into the slot in the bottom of the handle area. Hook the loop formed by
doubling the cord over the tab, as shown in Figures 1 and 1A. Gently tug on the cord to
insure that it is firmly retained in the trimmer’s handle. Plug the receptacle end of the
extension cord into the plug blades in the trimmer. For Catalog No. HT2000, HT2200, after
insuring that the cord is retained in the handle, plug the receptacle end of the extension cord
into the pigtail cord in the trimmer.
OPERATING INSTRUCTIONS
TO TURN THE TOOL ON
Pull the LOCK BUTTON back with your thumb and then squeeze the TRIGGER with your
fingers as shown in Figure 2. (Once the tool is running you can release the LOCK BUTTON.)
To turn the tool OFF, release the TRIGGER.
TO LOCK THE TOOL ON FOR CONTINUOUS RUN
WITH THE TOOL RUNNING, pull the LOCK BUTTON ALL THE WAY back, release the
TRIGGER, then release the LOCK BUTTON. The tool is now locked ON. To turn the tool
OFF, squeeze and release the TRIGGER. NOTE: In order to lock the tool on, it is important
to first release the trigger and then release the lock button.
TRIMMING INSTRUCTIONS
1 EXTENSION CORD – (Figures 1 and 1A) Always keep extension cord behind trimmer
and away from the trimming operation. Never drape it over a hedge being trimmed. If you
cut or damage the cord, unplug it at the electrical outlet immediately, before inspecting or
repairing cord.
2 WORKING POSITION – Maintain proper footing and balance and do not overreach.
Wear safety goggles, non-skid footwear and rubber gloves when trimming. Hold the tool
firmly in both hands and turn the tool ON. Always hold the trimmer, as shown in figure 3,
with one hand on the switch handle and one hand on the bail handle. Never hold the tool
by the blade guard.
3 TRIMMING NEW GROWTH - (Figure 4) – A wide, sweeping motion, feeding the blade
teeth through the twigs is most effective. A slight downward tilt of the blade, in the
direction of motion gives the best cutting.
CAUTION: Do not use the trimmer for cutting stems greater than 3/8” (10mm). Use the
trimmer only for cutting normal shrubbery found around houses and buildings.
Advertisement
Related Manuals for Black & Decker Ht2000
Summary of Contents for Black & Decker Ht2000
- Page 1 Plug the receptacle end of the extension cord into the plug blades in the trimmer. For Catalog No. HT2000, HT2200, after insuring that the cord is retained in the handle, plug the receptacle end of the extension cord into the pigtail cord in the trimmer.
- Page 2 GUIDE D’UTILISATION Modèles TR1400, TR1600, TR1700, TR1800, HT2000, HT2200 · Afin de s’assurer que la rallonge ne se débranche pas, la raccorder conformément aux figures 1 et 1A. · Pour faire fonctionner l’outil, on doit tirer sur le bouton de verrouillage (figure 2), puis enfoncer l’actionneur vers le haut.
- Page 3 Accrocher ensuite la boucle par-dessus l’onglet, tel qu’illustré aux figures 1 et 1A. Tirer doucement sur la rallonge afin de s’assurer qu’elle est bien retenue dans la poignée. Enficher ensuite la rallonge dans le raccord en tire-bouchon (numéro de catalogue HT2000 et HT2200 seulement) ou dans le raccordement à fiche de l’outil.
- Page 4 Enchufe el receptáculo del cable de extensión en las clavijas del cortacerco. Para la unidad con No. de Catálogo HT2000, HT2200 ,únicamente, después de asegurarse de que el cable ha quedado retenido en el mango, enchufe el receptáculo del cable de extensión en el cable flexible del cortacerco.