Machine Care; Maintenance And Care - Bissell Lift-Off 27F6 SERIES User Manual

M
aintenance and care
machine care (check regularly)
Cleaning suction gate
The suction gate automatically diverts
air when the portable deep cleaner
is detached. This should be checked
and cleaned regularly for any dirt
and debris.
1. step on the pedal and remove
the portable spot cleaner. Remove
dirty tank.
2. Remove two screws and pull off
suction gate door.
3. Wipe suction gate clean and rinse
suction gate door.
4. Replace suction gate door and
two screws.
Cleaning spray tips
1. step on the pedal and remove the
portable spot cleaner. to remove,
push in tab and pull it out.
2. clean by rinsing under hot water.
3. Replace by snapping back in.
4. Repeat steps on second spray tip.
Cleaning solution filter
1. step on the pedal and remove the
portable spot cleaner. Remove the
red solution filter cap on the base
of the machine by inserting a coin
or a flat head screw driver into the
slot on the top.
2. turn counter clockwise to unscrew.
set aside.
3. Remove the white filter by the post.
Rinse the filter under water.
4. Replace the white filter back into the
filter area.
Note: make sure the white filter is
seated properly before replacing
the red solution filter cap.
5. Replace the red solution filter cap and
turn clockwise to tighten.
w w w . b i s s e l l . c o m
WARNING:
to reduce the risk of fire, elec-
tric shock, or injury, turn power
off and disconnect plug
from electrical outlet before
performing maintenance or
troubleshooting.
2.
Suction
Gate
Spray
Tips
1.
2.
Solution
Filter Cap
3.
5.
Filter
8 0 0 . 2 3 7 . 7 6 9 1
13