Flexcom TK306 Installation And Operating Instructions Manual page 23

Flexcom Communication Ltd
Description
You can set the device to send an SMS
alert if the vehicle speed exceeds the
specified limit. The speed limit must be
entered in the form XXX, if less than
100, the leading zero must also be
written (eg 070).
Fuel and oil consumption alarm
Description
If the fuel consumption while driving
exceeds the normal level or the oil
level is low after stopping the engine,
the device sends the message oil:
xx% + position data to the
administrator's phone every 3 minutes.
Meanwhile, the horn (or siren) signals
20 times.
Standby mode and related alarms
Standby mode
Description
The device can be switched to standby
mode when the vehicle's engine is
stopped (ignition off) and all doors are
closed. In standby mode, the alarms
discussed below are automatically
activated.
Shock alarm
Description
SMS message
Turning on: speed123456
sebességhatár
For example: speed123456 070
A riasztó üzenet tartalma:
„Speed 70! <vehicle
position>"
Turning off: nospeed123456
SMS message
Turning on: oil123456
Turning off: nooil123456
SMS message
Turning on: arm123456
Turning off: disarm123456
SMS message
23/28
Installation and operating instructions (2021/03/08)
Device response
Device response
Device response
"Tracker is
activated" or
"Tracker is
deactivated"
Device response