Asus E2938 Hardware User Manual page 98

CPU Fan Profile [Optimal]
Allows you to set the appropriate performance level of the CPU Q-Fan. When
set to [Optimal], the CPU fan automatically adjusts depending on the CPU
temperature. Set this item to [Silent Mode] to minimize fan speed for quiet CPU fan
operation, or [Performance Mode] to achieve maximum CPU fan speed.
Configuration options: [Optimal] [Silent Mode] [Performance Mode]
Chassis Fan 1/2/3 Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the chassis
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A.
Chassis Q-Fan Control [Disabled]
Allows you to enable or disable the chassis Q-Fan controller.
Configuration options: [Disabled] [Enabled]
The Chassis Fan Profile item appears when you enable the Chassis Q-Fan
Control feature.
Chassis Fan Profile [Optimal]
Allows you to set the appropriate performance level of the chassis Q-Fan. When
set to [Optimal], the chassis fan automatically adjusts depending on the chassis
temperature. Set this item to [Silent Mode] to minimize fan speed for quiet chassis
fan operation, or [Performance Mode] to achieve maximum chassis fan speed.
Configuration options: [Optimal] [Silent Mode] [Performance Mode]
OPT Q-Fan and Temperature
Temperature 1 Reading
Temperature 1 Reading
Temperature 1 Reading
OPT_Fan 1 Reading
OPT_Fan1 Q-Fan Control
Duty Cycle Mode
OPT_Fan 2 Reading
OPT_Fan2 Q-Fan Control
Duty Cycle Mode
OPT_Fan 3 Reading
OPT_Fan3 Q-Fan Control
Duty Cycle Mode
Power Fan Reading
The onboard hardware monitor automatically detects the optional fan speed and
the voltage output. If the fan is not connected to the motherboard, the field shows
N/A.
4-30
[Optimal] [Silent Mode] [Performance Mode]
[Optimal] [Silent Mode] [Performance Mode]
:N/A
:N/A
:N/A
:N/A
:N/A
:N/A
:N/A
v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.
[Performance Mode]
BIOS SETUP UTILITY
Power
[DUTY CYCLE]
[90%]
[DUTY CYCLE]
[90%]
[DUTY CYCLE]
[90%]
Fan configuration
mode setting
Select Screen
Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 4: BIOS setup