Creating A Raid Driver Disk; Creating A Raid Driver Disk Without Entering The Os; Creating A Raid Driver Disk In Windows - Asus E2938 Hardware User Manual

5.5

Creating a RAID driver disk

A floppy disk with the RAID driver is required when installing Windows
and later operating system on a hard disk drive that is included in a RAID set.
5.5.1

Creating a RAID driver disk without entering the OS

To create a RAID driver disk without entering the OS:
1. Boot your computer.
2. Press <Del> during POST to enter the BIOS setup utility.
3. Set the optical drive as the primary boot device.
4. Insert the support DVD into the optical drive.
5. Save changes and exit BIOS.
6. Press any key when the system prompts "Press any key to boot from the
optical drive."
7. When the menu appears, press <1> to create a RAID driver disk.
8. Insert a formatted floppy disk into the floppy drive then press <Enter>.
9. Follow succeeding screen instructions to complete the process.
5.5.2

Creating a RAID driver disk in Windows

To create a RAID driver disk in Windows
1. Start Windows
2. Place the motherboard support DVD into the optical drive.
3. Go to the Make Disk menu, then click Intel ICH8R 32/64 bit RAID Driver Disk
to create an Intel
32/64-bit RAID Driver to create a JMicron JMB363 RAID driver disk.
4. Insert a floppy disk into the floppy disk drive.
5. Follow succeeding screen instructions to complete the process.
Write-protect the floppy disk to avoid computer virus infection.
ASUS Commando
® .
ICH8R RAID driver disk or the Make JMicron JMB36X
®
® :
® 2000/XP
®
5-37