Troubleshooting - Canon CDI-M113-010 User Manual

Card photo printer
Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting

If the printer does not seem to be working properly, run through the checks
below to see if you can identify and correct the problem. If you are not able to
solve the problem, please call your dealer or contact a Canon Customer
Support help desk for assistance.
Problem
The printer has no power.
The printer's indicator is blinking
red.
The
(Direct Print) mark does
not display in the upper left
corner of the LCD monitor.
The printer does not print.
Printing stopped midway.
34
Cause
The compact power adapter or AC
cable is not correctly connected.
There is a malfunction in the
printer.
The cable is not correctly
connected.
The printer's power is off.
Your camera's firmware is
incompatible with this printer.
The printer is connected to a
computer and printing is in
progress.
The printer is not correctly
connected to the camera.
The camera's batteries are
depleted.
The printer's battery pack is
depleted. (CP-300 only)
The ink cassette is not loaded
correctly.
Too muck slack in the ink
cassette's ink sheet.
The paper cassette is not pushed
all the way in.
The printer has overheated.
The printer is not correctly
connected to the camera.
Solution
Be sure that the compact power
adapter and AC cable are
connected correctly. Be sure that
the AC cable is plugged into a
standard power outlet.
Turn the printer's power off and
turn it on again.
Connect the cable correctly (
26).
Turn the printer's power on (
26).
Please check the Canon BeBit
website or your regional Canon
website.
Wait until the print outputted by
the computer is complete.
Connect the cable correctly (
26). If the connection is correct,
the
icon will appear on the
camera's LCD monitor.
Replace with fully charged (fresh)
batteries, or plug the camera into
a power outlet (using the
camera's optional compact power
adapter).
Use a fully charged battery pack
or use the printer's compact
power adapter.
Load the ink cassette correctly.
(
p. 22)
Take up the slack.
Load the paper cassette correctly.
(
p. 25)
Wait for the printer to cool down.
Connect the cable correctly. (
p. 26)
p.
p.
p.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-200Cp-300

Table of Contents