Download Print this page

Apple Processor Cage and Clips Replacement Instructions Manual Page 9

Processor cage and clips replacement instructions.
Hide thumbs

Advertisement

18
Disconnect 3 cables
from logic board.
19
Using long-handled
Phillips #1 screwdriver,
loosen 6 captive
screws.
20
Rotate computer to
stand vertically. Using
2.5 mm hex driver,
remove 5 mushroom-
head screws.
21
To release 2 latches
holding front fan to
cage, press down on
bottom of cage while
using flatblade
screwdriver to release
latch from top of
cage.
22
Slide fan partway
into cage, so that fan
clears enclosure.
23
Repeat steps 4 and 5
for rear fan.
© 2009 Apple Inc. All rights reserved.
Note: Processor cage includes two fans, one at each end of cage. Before removing cage from
enclosure, you must release 2 latches on each fan and push fans partway into cage.
9
073-1253 Rev. A

Advertisement

   Related Manuals for Apple Processor Cage and Clips

This manual also for:

Mac pro

Comments to this Manuals

Symbols: 0
Latest comments: