Holding card by top
corners, pull it up out
Remove card from
© 2009 Apple Inc. All rights reserved.
Checklist for handling card:
When removing or installing card, handle it only by the edges. Do not touch its connectors
or any components.
Don't rock card from side to side; instead, lift card straight up from connecotr to remove it,
and press card straight into slot to install it.
Don't force card. If you meet a lot of resistance, pull card out. Check connector and slot for
damage or obstructions, then try inserting card again.
Pull card gently to see if it is properly connected. If it resists and stays in place and its gold
connectors are barely visible, card is connected.
073-1253 Rev. A