Table Of Contents - Sharp CV-P09FR Installation And Operation Manual

ENGLISH
This manual explains the proper use of your new air conditioner. Please read this manual
carefully before using the product. This manual should be kept in a safe place for handy
reference.
CONTENTS
• IMPORTANT SAFETY INSTRUCTIONS ... E-1
• LOCATION ................................................. E-3
• INCLUDED ................................................. E-3
• PART NAMES ............................................ E-4
• USING THE REMOTE CONTROL ............ E-6
• INSTALLATION AND REMOVAL
OF EXHAUST HOSE ................................. E-8
• COOL MODE ............................................. E-9
• DEHUMIDIFICATION MODE ..................... E-10
• FAN MODE ................................................ E-11
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC
as amended by 93/68/EEC.
IMPORTANT SAFETY INSTRUCTIONS
Points to keep in mind when using your air conditioner.
WARNINGS FOR USE
• Do not modify any part of this product.
• Do not insert anything into any part of the unit.
• Ensure the power supply used has an appropriate voltage rating.
Only use a 220 V - 240 V, 50 Hz,10 A mains electricity supply.
Use of a power supply with an improper voltage rating can result in damage to the unit and
possibly fire.
• Always use a fuse with the proper amp rating.
Do not, under any circumstances, use wire, pins or other objects in place of a proper fuse.
• In the event of any abnormality with the air conditioner (ex. a burning smell), turn it
off immediately and disconnect the power supply.
WARNING FOR POWER SUPPLY CORD
• This power plug must only be plugged into an appropriate wall socket. Do not use in
conjunction with any extension cords.
• Push the power plug securely into the socket and make sure it is not loose.
• Do not pull, deform, or modify the power supply cord, or immerse it in water.
Pulling or misuse of the power supply cord can result in damage to the unit and cause
electrical shock.
• If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a simi-
larly qualified person in order to avoid a hazard. Use
only the manufacture-specified power cord for re-
placement.
• This appliance must be grounded.
This appliance is equipped with a cord having a ground-
ing wire with a grounding tab. The plug must be plugged
into an outlet that is properly installed and grounded.
• VENTILATION MODE ............................ E-11
• TO CHANGE AIR FLOW DIRECTION .. E-12
• TURBO COOL OPERATION ................. E-13
• ONE-HOUR OFF TIMER ....................... E-13
• TIMER OPERATION .............................. E-14
• PLASMACLUSTER OPERATION ......... E-16
• AUXILIARY MODE ................................ E-16
• DRAINAGE ............................................ E-17
• MAINTENANCE ..................................... E-18
• BEFORE CALLING FOR SERVICE ...... E-19
Plug
E-1
Grounding tab