Table of Contents
Advertisement
Setting or Changing Names
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Select Name Configuration Menu.
The Name Configuration Menu appears.
3. Select the name setting you want to change. The choices are Camera Name, Area Name,
Preset Name, Pattern Name, and Alarm Name.
•
If you choose Camera Name, continue with step 6.
•
If you choose Area Name, Preset Name, Pattern Name, or Alarm Name, continue with
step 4.
4. The Select Name to Program screen appears.
5. Press Zoom to change the number. When the item whose name you want to change appears press
Focus Far.
Note:
starting position of the associated selection each time the number is advanced.
6. The Name Programming screen appears.
Figure 5–6: Example Name Programming Screen
5–8
PRESET
NUMBER
1-96
1-3
1-16
1-4
FOCUS FAR to program names
Note:
Gray text refers to other options that may appear on-screen.
If Presets, Patterns, or Areas have been programmed, the dome automatically points to the
CAMERA
NAME: CAMERA.............
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z a b c d e f g h i j k l m n
o p q r s t u v w x y z
7 8 9 / -
SELECT NAME TO PROGRAM
/PATTERN/AREA/ALARM
CURRENT NAME
Preset 1-96
Pattern 1-3
Area 1-16
Alarm 1-4
EXIT
NAME PROGRAMMING
/PRESET/PATTERN/AREA/ALARM
UNDO CHANGES AND QUIT
EXIT
SpeedDome Ultra VII Day/Night Operator's Manual
0 1 2 3 4 5 6
Blank Space
character
Advertisement
Table of Contents
