Table of Contents
Advertisement
3. Adjust the pan position of the dome to set the left scan limit. Press Zoom to select.
4. Pan the dome to the right to set the right scan limit. Press Zoom to select.
5. When the Alarms/Areas/Home/Presets/PZ screen appears, select Exit. The Dome
Configuration Menu appears. Continue with What To Do Next on page 4–20.
What To Do Next
When you select Exit from the Alarms/Areas/Home/Presets/PZ screen, the Dome Configuration
Menu appears.
From this screen you can:
•
Select an option to make additional changes.
•
Restore all settings to the factory defaults.
•
Exit the utility without saving changes.
•
Save the changes and exit the utility.
Move the highlight bar to an item and select it. Refer to the related chapter for additional information.
4–20
Note:
Press Focus during steps 3 or 4 to cancel scan limit programming.
DOME CONFIGURATION MENU
Chapter 2
PAN/TILT/ZOOM/SYNC OPTS
Chapter 3
Chapter 4
ALARMS/AREAS/PRESETS/PZ
Chapter 5
ON-SCREEN TEXT DISPLAY
Chapter 6
Chapter 7
RESET TO FACTORY SETTINGS
EXIT AND SAVE CHANGES
CAMERA FUNCTIONS
LANGUAGE / PASSWORD
DOME INFORMATION
QUIT WITHOUT SAVING
SpeedDome Ultra VII Day/Night Operator's Manual
Chapter 1
Advertisement
Table of Contents
