Dimensions | 13 DOCUMENT CONVENTIONS This document contains general safety, installation, and operation instructions for the Wisdom Audio Sage Series P20i Speaker. It is important to read this document before attempting to use this product. Pay particular attention to: WARNING: Calls attention to a procedure, practice, condition or the like that, if not correctly performed or adhered to, could result in injury or death.
See the following section entitled “Description” for more information. While we expect your local Wisdom Audio dealer to take care of the setup and calibration of the system, we still recommend that you at least briefly review this and your other manuals to better understand your system’s full capabilities.
Page 4
One of the most remarkable things about the sound of well-designed planar magnetic speakers is their lack of thermal or dynamic compression. There are several reasons for this: • The lightweight diaphragm responds quickly to even the smallest signals yet is robust enough to handle a great deal of power.
80 Hz, which is the most common bass management transition used to integrate with subwoofer(s). Unpacking and Installing the P20i The Wisdom Audio Sage P20i freestanding speaker is a substantial piece of equipment. Please exercise caution when unpacking your P20i to ensure that you do not strain yourself from its (perhaps unexpected) weight.
Page 6
– damage that would not be covered by the warranty. (If you lose your packaging and need to ship your speakers, replacement packaging can be purchased from Wisdom Audio.) Framing in for the P20i – The horizontal configuration of the P20i spans the normal space between studs in traditional American construction.
Page 7
1. Determine the area for the speaker installation and locate the cutout guide using pushpins to secure it in place. Ensure that the template is plumb using a bubble level or similar. Note: Make certain that there are no studs, plumbing or electrical conduit in the intended area behind the wall before you begin marking and cut- ting! 2.
(such as a short- circuit). Two sets of speaker wires are required for each Sage P20i loudspeaker: one for the woofer (low pass) section, and a separate one for the planar magnetic (high pass) section that handles the midrange and treble.
During the warranty period, any Wisdom Audio products exhibiting defects in materials and/or workmanship will be repaired or replaced, at our option, without charge for either parts or labor, at our factory. The warranty will not apply to any Wisdom Audio SAGE SERIES P20i...
Wisdom Audio for further service information or parts, or to obtain a Return Authorization. The Wisdom Audio Service Department works closely with your dealer to solve your service needs expediently.
Page 11
If the packaging to protect the unit is, in our opinion or that of our dealer, inadequate to protect the unit, we reserve the right to repackage it for return shipment at the owner’s expense. Neither Wisdom Audio nor your dealer can be responsible for shipping damage due to improper (that is, non-original) packaging.
• Power handling, peak: 500w • Dimensions: See appropriate dimensions drawings on next page • Shipping weight, each: 21 lbs. (9.5 kg) For more information, see your Wisdom Audio dealer or contact: Wisdom Audio 1572 College Parkway, Suite 164 Carson City, NV 89706 wisdomaudio.com...
Need help?
Do you have a question about the Sage P20i and is the answer not in the manual?
Questions and answers