Canon BJC-5100 Series User Manual page 12

Do not use the printer near water. If you spill liquid on or into the
printer, unplug it immediately and call the Customer Care Center
(see page 1-4).
Slots and openings in the printer and on the back or bottom are
provided for ventilation. To ensure reliable operation of the printer
and to protect it from overheating, do not block or cover these
openings. Do not block the openings by placing the printer on a bed,
sofa, rug, or other similar surface. Do not place the printer near a
radiator or heat register, nor in a closet or built-in cabinet unless
proper ventilation is provided.
Operate the printer only from the type of power source indicated on
the printer's label. If you are unsure of the type of power available,
consult your dealer or local power company.
Set up the printer near the electrical outlet you plan to use. Make
sure the outlet is easily accessible.
If you use an extension cord with the printer, make sure that the
total of the ampere ratings on the products plugged into the
extension cord does not exceed the extension cord ampere rating.
Also, make sure that the total of all products plugged into the wall
outlet does not exceed 15 amperes.
To avoid injury, do not allow children access to the interior of the
printer and do not allow them to touch any electrical contacts or
gears that are exposed.
Do not allow anything to rest on the power cord, and do not locate
the printer where the cord will be walked on. Make sure the power
cord is not knotted or kinked.
Do not push objects of any kind into the slots or openings on the
printer. This could result in a fire or electric shock.
Do not allow small objects (such as pins, paper clips, or staples) to
fall into the printer. If something does fall into it that you cannot
remove, unplug the printer immediately and call the Customer Care
Center (see page 1-4).
1-6 Introduction Chapter 1