Canon BJC-250 User Manual page 43

3
Setup the
BJC-250
Printer Driver
for Windows.
4
Dry and then
wash the
fabric
In the Paper tab, select A4 for the Paper Size and select Fabric Sheet for
the Print Media.
In the graphics tab, select High for the Print Quality.
Start the print operation from your Windows application.
Let the printed fabric sheet set for about one hour to allow the ink to
completely dry.
When dry, peel the film backing from the printed fabric sheet. Do not remove
the film backing before printing.
Wash the printed fabric sheet for about three minutes under lukewarm running
water to remove the extra ink
Hang the fabric sheet up to dry it again.
Iron the dried fabric sheet with a cloths iron.
See the booklet that comes with Fabric Sheet FS-101 for details on drying and
washing.