Canon BJ-230 User Manual page 67

The cover slides down into the printer.
3. Use a pointed object, such as a ballpoint pen, to change the DIP
switch settings. A DIP switch is OFF when it is up, and ON when
it down.
4. Close the DIP switch cover after making your selections.
The new DIP switch settings take effect when you turn on the printer.
If you turn off or reset the printer, or if the printer receives the Set Initial
Conditions command from a software program, the printer resets its
functions to the settings defined by the DIP switches.
BJ-10 Mode
When the printer is in BJ-10 mode (DIP switch 12 is OFF), you can set
the DIP switches to control the following functions:
DIP switch Function
1
2
3
4
5
Horizontal print
position
Text scale mode
Reduction mode
Page length
Ch t t
OFF
Letter size or
COM 10 envelope
Disabled
Disabled
11 inches
S t 1
ON
A4 size or
DL size envelope
Enabled
Enabled
12 inches
S t 2