This chapter covers the care and maintenance of your
Canon Bubble Jet Printer BJ-200ex. This includes
guidelines, cleaning the printer, replacing the ink cartridge,
and transporting the printer.
Follow these guidelines to avoid damage to your printer
and harm to you or others:
Set the printer on a stable surface. Do not use an angled printer
Keep the front cover closed when printing.
Do not set anything on top of the printer.
Always use a three-wire, grounded power receptacle
(electrical wall outlet with three holes) for your printer's power
cord. Do not modify the cord to remove the ground pin.
Make sure the power is off any time you connect or disconnect
the power cord or interface cable.
Do not move the mechanism that holds the ink cartridge. You
may damage delicate mechanical parts.
Do not touch the print area on the ink cartridge. If the ink
spills, it is difficult to clean.
Cleaning the Printer
Your printer requires little routine maintenance. Perform
the following maintenance, as necessary, to keep your
printer in good operating condition.
Maintaining the Printer