Operating Procedures - Canon N1220U User Manual

Operating Procedures

The following provides an example of scanning from within ArcSoft PhotoStudio
2000.
Verify that the scanner is attached to your computer and that the power
is on.
Read the Getting Started guide for instructions on how to connect the scanner.
Start ArcSoft PhotoStudio 2000.
Select Plug-in Module CS-U from within ArcSoft PhotoStudio 2000.
Open the [File] menu, select [Acquire] and [CanonPI CS-U 3.8.0...].
The Plug-in Module CS-U control panel will display.
Caution
• Plug-in Module CS-U is not a stand-alone application program. It must be
started from a plug-in compatible application program, such as CanoScan
Toolbox CS or ArcSoft PhotoStudio 2000.
• The size of the Plug-in Module CS-U control panel will vary according to
the resolution of the computer display.
• The size of the control panel can be adjusted with the [Preview
Window...] option in the [Preferences] menu
S T E P
(p.
15
1
26).