AEG COMPETENCE D8800-4 Installation And Operating Instructions Manual page 9

TO CANCEL THE COUNTDOWN
If you change your mind and want to cancel the
'Countdown', press the Time Selector button until the
'Countdown' indicator neon flashes then depress the
decrease control (-) until 00.00 shows in the display
as Fig. 5. The 'Countdown' indicator neon will
continue to flash for a few seconds and then return to
the operating time.
3. SETTING THE OVEN TIMER CONTROL
When using the timer control for the very first time, it
is advisable to let it operate while you are at home.
The displays can be checked to show that it is
operating correctly and you will feel confident to
leave a meal to cook automatically in the future.
A) TO SET THE TIMER TO SWITCH ON
AND OFF AUTOMATICALLY
i) Ensure the electricity supply is switched ON and
that the correct time of day is displayed, e.g.
9.a.m. as Fig. 6.
ii) Set the control to the required function and
temperature.
iii) Place food in the oven.
iv) To set the length of cooking time. Press the Time
Selector button until the 'Cook Time' indicator
neon is illuminated. Press the increase control
(+) until the required length of cooking time is
displayed, e.g. 2 hrs 15 mins as Fig. 7. If
necessary depress the decrease control (-) until
the correct time interval is achieved.
The maximum cooking time is 9 hours 59
minutes.
v) Release the buttons. The 'Cook Time' indicator
neon will be illuminated.
Remember, this must be completed within 5
seconds of first pressing the Selector Control
button.
vi) To set the 'End Time'. Press the Time Selector
button until the 'End Time' indicator neon
flashes. Press the increase control button (+)
until the required stop time is displayed, e.g.
12.15 p.m. as Fig. 8. If necessary depress the
decrease control (-) until the correct time interval
is achieved.
vii) Release the buttons. The 'Cook Time' and 'End
Time' indicator neons will be illuminated.
The 'End Time' must not be more than 23 hours
59 minutes from the time of day. For example, if
the time of day is 09.00 a.m., the latest 'End
Time' would be 08.59 a.m. the next day.
viii) The function and temperature selected will
remain in the display.
NOTE: When the automatic timed period starts,
the heat indicator will flash until the oven has
reached the desired temperature and then stop.
Fig.5.
Fig.6.
Fig.7.
Fig.8.
9