overstock BK1982 Assembly Instructions

3 tier book shelf

MODEL : #BK1982 3 TIER BOOK SHELF

NOTE TO CUSTOMERS:

For ease and speed of assembly we recommend that before you commence each step of the

assembly that you identify all the parts required to complete that step.

We recommend that where possible you allow sufficient space to assemble the item as close

as possible to the place where it will be once assembled.

For the protection of your furniture we recommend that the product is placed on a dry, soft,

smooth and clean surfaces during assembly to prevent any damage. Avoid damp and direct

sunlight.

During assembly do not over tighten the screws or bolts, as this may damage the product.

Please ensure you retain all the product packaging until the item is completely assembled.

Periodically check all fitting and re-tighten as necessary.

Never allow any liquids to remain on your furniture as absorption can cause the wood to warp

or finish to de-laminate.

It is recommended that this item should be assembled by two adults.

PAGE 1 OF 2

Table of Contents

Need help?

Do you have a question about the BK1982 and is the answer not in the manual?

Page 1 MODEL : #BK1982 3 TIER BOOK SHELF NOTE TO CUSTOMERS: For ease and speed of assembly we recommend that before you commence each step of the assembly that you identify all the parts required to complete that step. We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled.
Page 2 ITEM: #BK1982 - 3 TIER BOOK SHELF Leg Panel Front Left Leg Panel Front Right Upper Shelf Panel Lower Shelf Panels Side Rail Quantity: 2 TOOLS REQUIRED MALLET Back Rail Leg Panel Rear Left Leg Panel Rear Right Screw m4 x 25mm Sticker 1 ”...