Power Saving; Ddc - Acer AL1502 User Manual

POWER SAVING

The monitor will be driven into "Power Saving" mode by the control signal from the
display controller, as indicated by the amber-color power LED.
The power saving states will be kept until a control signal has been detected or the
keyboard or mouse is activated. The recovery time from Active OFF state back to ON state
is around 3 seconds.

DDC

To make your installation easier, the monitor is able to Plug and Play with your system if
your system also supports DDC protocol. The DDC (Display Data Channel) is a
communication protocol through which the monitor automatically informs the host system
about its capabilities, for example, supported resolutions and corresponding timing. The
monitor supports DDC2B standard.
Power
State
Consumption
ON Normal
Active
< 3 W
OFF
AL1502
LED Light
Green
Amber
E-7