Canon Pixma iP5200 Series Quick Start Manual

Canon Pixma iP5200 Series Quick Start Manual

Canon pixma ip5200 photo printer quick start guide
Hide thumbs Also See for Pixma iP5200 Series:

Advertisement

Photo Printer
Series

Quick Start Guide

Advertisement

Table of Contents
loading

Summary of Contents for Canon Pixma iP5200 Series

  • Page 1: Quick Start Guide

    Photo Printer Series Quick Start Guide...
  • Page 2: Getting Help From Canon

    CarePAK offers toll-free Canon technical support and includes Canon’s superb InstantExchange product replacement program. For further information about extending your Canon service and support, call (1-800-385-2155), or visit our Web site at www.canonesp.com. CarePAK must be purchased during your product’s warranty period.
  • Page 3 Photo Printer Quick Start Guide...
  • Page 4 This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc. © 2005 Canon U.S.A., Inc.
  • Page 5: Table Of Contents

    CANON U.S.A., INC. LIMITED WARRANTY --- (USA Only)....... . .
  • Page 6: Basic Printing

    Basic Printing Basic Printing Quick Start Guide This to use them. For more information, view the iP5200 Driver Guide installed on your computer, or use the online help within your printer driver interface: While in the printer’s properties window, press the F1 key, or click upper right corner.
  • Page 7: Turning Off The Printer

    Turning off the Printer To turn off the printer, press the POWER button. When the POWER lamp stops blinking, the printer is turned off. About the Power Plug When removing the power plug after turing off the printer, be sure to check that the POWER lamp is not lit.
  • Page 8: Loading Paper

    • Damp paper • Excessively thin paper (less than 64 gsm or 17 lb) • Excessively thick paper* (more than 105 gsm or 28 lb) * non-Canon branded paper • Picture postcards • Postcards affixed with photos or stickers • Envelopes with double flaps •...
  • Page 9: Using The Auto Sheet Feeder And The Cassette

    Using the Auto Sheet Feeder and the Cassette You can load paper in both the Auto Sheet Feeder and Cassette. Loading paper in the Auto Sheet Feeder is easy, and is convenient if you frequently switch to and print on various sizes or types of paper. Loading paper in the Cassette allows you to print without reloading paper for each job.
  • Page 10 Basic Printing • Continuous printing on the same type/size of paper by using both the Auto Sheet Feeder and Cassette together If the Auto Sheet Feeder or Cassette runs out of paper, the paper source automatically switches to the other one. This is useful for printing onto a large volume of paper. To use this feature, you need to configure the printer driver beforehand.
  • Page 11 Loading Plain Paper in the Auto Sheet Feeder For detailed information on the specialty media Canon provides for use with its various printers, refer to See “Printing Media” in the how to load specialty media into the printer. Flatten the four corners of the paper before loading it.
  • Page 12 You can use general copy paper or Canon’s Super White Paper. You can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm or 0.52 inches in height) in the Auto Sheet Feeder. However, do not stack more than 50 sheets in the Paper Output Tray.
  • Page 13: Loading Envelopes

    Loading Envelopes Use either European DL or US Comm. Env. #10 size envelopes. The address is rotated automatically to match the direction of the envelope when printing. Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals or sticker flaps. Select either European DL Env.
  • Page 14 20, or Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper to be jammed. We recommend using genuine Canon photo media when printing photographs. (3) Press the Paper Feed Switch so that the Auto Sheet Feeder lamp lights.
  • Page 15: Loading Plain Paper In The Cassette

    Ensure that the paper is loadable in the Cassette. Legal-sized paper and 2.13" x 3.39" / 54.0 x 86.0 mm size paper, and Photo Stickers are not loadable in the Cassette. For detailed information on the specialty media Canon provides for use with its various printers, refer to See “Printing Media”...
  • Page 16 Basic Printing Adjust the size of the Cassette. When loading A5- or larger sized paper (nonstandard-size paper: 203 mm / 8 inches or more in length), extend the Cassette. When loading 5" x 7"- or smaller sized paper (nonstandard-size paper: less than 203 mm/ 8 inches in length), do not extend the Cassette.
  • Page 17 Load the paper. (Print side facing DOWN) You can use general copy paper or Canon’s Super White Paper. You can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm or 0.52 inches in height) in the Cassette. However, do not stack more than 50 sheets in the Paper Output Tray.
  • Page 18 Basic Printing Insert the Cassette into the printer. If the Cassette has been extended to accommodate paper sizes larger than 5" x 7", the front edge of the cassette will extend beyond the front of the printer. Prepare the Paper Output Tray. You can also select the paper source with the printer driver.
  • Page 19 Loading Envelopes Use either European DL or US Comm. Env. #10 size envelopes. The address is rotated automatically to match the direction of the envelope when printing. Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals or sticker flaps. Select either European DL Env.
  • Page 20 Basic Printing Loading 4" x 6" or 5" x 7"-Sized Paper in the Cassette Do not leave photo paper, such as Photo Paper Pro, in the Cassette for a long time. This may cause paper discoloration due to natural aging. Cutting plain paper to 4"...
  • Page 21 20, or Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper to be jammed. Portrait We recommend using genuine Canon photo media when printing photographs. “Using Specialty Media” “Printing with Macintosh” Landscape on page 18.
  • Page 22: Using Specialty Media

    Basic Printing Using Specialty Media Canon recommends that you use genuine Canon media to ensure optimal print quality. Photo Quality Media • High Resolution Paper • Glossy Photo Paper • Matte Photo Paper • Photo Paper Plus Double Sided • Photo Paper Plus Glossy •...
  • Page 23 Canon Specialty Media Media Type Paper Support Load Limit Auto Sheet Feeder High Resolution Up to 80 sheets Paper Super White Paper Up to 13 mm or 0.52 inches Glossy Photo Paper Letter: up to 10 sheets 4" x 6": up to 20 sheets 2.13"...
  • Page 24: Printing With Windows

    Basic Printing *1 When loading a stack of paper, the printed side may be marked when it is fed in. If this happens, load paper one sheet at a time. *2 You can specify the print setting easily by using the Easy-PhotoPrint provided with the Guide CD-ROM *3 Feeding from the Cassette can damage the printer.
  • Page 25 Open the printer properties dialog box. (1) Select Print from the application software’s File menu. The Print dialog box opens. Specify the required settings. (2) Ensure that your printer is selected. (3) Click Preferences or Properties. (1) Click Media Type to select the type of media loaded in the printer.
  • Page 26 Basic Printing From the Page Setup tab, select the correct document size to be printed. This section describes the procedure for selecting the paper source with the Paper Feed Switch on the printer. For a detailed description of the Paper Source settings, refer to the To adjust the Print Quality settings, select Custom and click Set on the Main tab.
  • Page 27: Printing With Macintosh

    Printing with Macintosh Menu and command names may differ between software applications, and more steps may be required. For details, refer to the documentation for each software application you use. The steps described in this section are for printing in Mac (hereafter called Macintosh Turn on the printer.
  • Page 28 The Page Setup dialog box opens. Specify the required settings. (1) Select Print from the application software’s File menu. The Print dialog box opens. (2) Confirm that iP5200 is selected in Format for. (3) Select the desired paper size from Paper Size.
  • Page 29 This section describes the procedure for selecting the paper source with the Paper Feed Switch on the printer. For a detailed description of the Paper Source settings, refer to the Driver Guide When you select the print mode appropriate to your document from Print Mode, the document will be printed in color and at a print quality suited to the characteristics of the Media Type you have selected.
  • Page 30: Canceling Printing

    Press the RESUME/CANCEL button while printing. Printing is canceled and paper is fed out. You can also cancel a print job by clicking Cancel Printing on the Canon IJ Status Monitor. To display the Canon IJ Status Monitor, click Canon iP5200 on the taskbar.
  • Page 31 The Printer List opens. Double-click the printer name displayed in the Name list. The iP5200 dialog box opens. Select the desired document, then click Delete icon. To temporality stop a job in progress, click Pause. To cancel all the jobs in the list, click Stop Printing.
  • Page 32: Advanced Printing

    It is possible to specify which images to print and various print settings from the operation panel of your camera or mobile phone. Canon Bubble Jet Direct allows you to print photos from a Canon Bubble Jet Direct compatible (PictBridge incompatible) digital camera or digital video camcorder without a computer, by simply connecting the digital camera or digital camcorder to this printer.
  • Page 33: Connecting To A Pictbridge Compliant Device

    Do not connect any equipment other than PictBridge compliant devices or Canon Bubble Jet Direct compatible digital camera to the Direct Print Port of the printer. If you do so, electric shock, fire, or damage to the device could result.
  • Page 34 Advanced Printing Connect the PictBridge compliant device to the printer. Depending on the model or brand of your device, you may have to select a print mode compliant with PictBridge before connecting the device. You may also have to turn on the device or select Play mode manually after connecting the device to the printer.
  • Page 35 If any setting cannot be made, the default setting explained above is used. Names of settings that are displayed on Canon PictBridge compliant device are used in the description given below. Different names may be displayed on your device depending on the brand or model.
  • Page 36 *1 This paper is exclusively used to print photo stickers. When printing on sticker paper, select 4" x 6" in Paper size. *2 This size can be selected only for Canon PictBridge compliant devices (note that it cannot be selected for some models).
  • Page 37 About “Image optimize” By default, ExifPrint is selected for this printer. If you use a Canon PictBridge-compatible device, you can select VIVID, NR, VIVID+NR, or Face. (Note that these options cannot be selected for some models.) When VIVID is selected, green and blue portions of photos are printed vividly.
  • Page 38 Digital Camera” Checking or Changing PictBridge Print Settings From the Printer Connecting this printer to a computer and using the Canon Setup Utility enables you to change items such as the paper type, paper size, and the standard PictBridge print settings.
  • Page 39: Accessing The Printer Driver (Windows)

    Accessing the Printer Driver (Windows) The printer properties dialog box can be opened from either within an application, or directly from the Windows Start menu. This manual refers to Windows XP SP2 operation. The operations may vary depending on the version of your Windows operating system.
  • Page 40: Using The Bundled Software

    Canon PIXMA Printers support ExifPrint and use a suitable photo application to read the camera data precisely, producing optimal prints.
  • Page 41: Printing Maintenance

    Printing Maintenance Replacing an Ink Tank Replace ink tank(s) if they are out of ink. When replacing them, check the model numbers and their installation positions. With this printer, the ink tanks must be installed in the order (from left to right) indicated below: Should missing characters or white streaks appear despite sufficient ink levels, refer to...
  • Page 42: Getting The Ink Level Information

    2. Click View Printer Status on the Maintenance tab. The following message will be displayed. * You can also display the Canon IJ Status Monitor by clicking the Canon IJ Status Monitor button which appears on the taskbar during printing.
  • Page 43 Open the Canon IJ Printer Utility to check the ink level information. 1. Select Applications from the Go menu, and then double-click the Utilities folder. 2. Double-click the Printer Setup Utility icon. When using Mac OS X v.10.2, double-click the Print Center icon.
  • Page 44 * Printing does not resume if any of the ink tanks are removed. Be sure to press the RESUME/CANCEL button with the ink tanks installed. * Continuing to print in the out of ink state will cause the remaining ink level to be displayed incorrectly in the Canon IJ Status Monitor.
  • Page 45 * Printing does not resume if any of the ink tanks are removed. Be sure to press the RESUME/CANCEL button with the ink tanks installed. * Continuing to print in the out of ink state will cause the remaining ink level to be displayed incorrectly in the Canon IJ Printer Utility.
  • Page 46: Replacing Ink Tanks

    Printing Maintenance Replacing Ink Tanks When an ink tank runs out of ink, replace it using the following steps. Ensure that the printer is on, and then open the Paper Output Tray. Push the Open Button above the Paper Output Tray. The Paper Output Tray automatically opens.
  • Page 47 Prepare a replacement tank. (1) Unpack the new ink tank and completely pull off the orange tape. Then, remove the film completely. (2) Remove the orange protective cap from the bottom of the ink tank and discard it. Be sure to remove the clear film from the ink tank in the exact order shown in step 4-(1), as failure to follow this step may cause the ink to leak and stain your clothes and hands.
  • Page 48 Printing Maintenance Insert the ink tank. (1) Insert the ink tank into the Print Head. (2) Press on the (3) Ensure that the ink tank lamp lights red. Ensure that all the ink tanks are installed in the order directed by the label.
  • Page 49 Close the Inner Cover and the Top Cover. The Print Head Holder moves to the right. The ink tank installation process is now complete. Ensure that the Inner Cover is closed. Printing will not occur if the Inner Cover is open. The ALARM lamp still flashes orange after the Top Cover is closed if an ink tank is not installed properly.
  • Page 50: When Printing Becomes Faint Or Colors Are Incorrect

    Printing Maintenance When Printing Becomes Faint or Colors are Incorrect When printing becomes faint or colors are incorrect, even if ink remains in the ink tanks, the Print Head nozzles are probably clogged. Follow the procedures below to clean the nozzles. If the ruled lines are shifted after running the print head maintenance, align the Print Head.
  • Page 51: Printing The Nozzle Check Pattern

    Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the Print Head nozzles. Use this function when printed results are blurred or the color is incorrect. Ensure that the Inner Cover is closed. Printing the Nozzle Check Pattern Without a Computer Nozzle check pattern printing can also be executed from the printer itself.
  • Page 52 Printing Maintenance Print the Nozzle Check Pattern. (3) Read the message and click Print Check Pattern. The nozzle check pattern will be printed. Clicking Initial Check Items displays the items to be checked before printing the pattern. Examine the pattern and take the appropriate action. “Examining the Nozzle Check Pattern”...
  • Page 53 Open the Canon IJ Printer Utility dialog box. (1) Select Applications from the Go menu, and then double-click the Utilities folder. (2) Double-click the Printer Setup Utility icon. When using Mac OS X v.10.2, double-click the Print Center icon. (3) Select the name of your printer from the Name list and click Utility.
  • Page 54: Examining The Nozzle Check Pattern

    Printing Maintenance Examining the Nozzle Check Pattern The nozzle check pattern should appear as follows when ink is discharged properly. Examine the nozzle check pattern output by the printer, and clean the Print Head when necessary. The nozzle check pattern will not be printed correctly if there is not enough ink.
  • Page 55 Printing Maintenance When cleaning is necessary, click Cleaning on the Pattern Check dialog box. If you want to continue to clean the Print Head from here, go to step 3-(3) of the Windows or Macintosh Print Head Cleaning procedures as appropriate. “Print Head Cleaning”...
  • Page 56: Print Head Cleaning

    Printing Maintenance Print Head Cleaning Clean the Print Head if missing lines or white stripes appear in the nozzle check pattern. Note that cleaning the Print Head causes waste ink to be absorbed in the waste ink absorber. Cleaning the Print Head consumes ink, so perform Print Head Cleaning only when necessary.
  • Page 57 Start Print Head Cleaning. Print Head Cleaning starts when the POWER lamp starts blinking green. Do not perform any other operations until the Print Head Cleaning finishes. This takes about 50 seconds. (5) Read the message and click Print Check Pattern to print the nozzle check pattern. The nozzle check pattern is printed.
  • Page 58 Cleaning on the Pattern Check dialog box. “Examining the Nozzle Check Pattern” Ensure that the printer is on. Open the Canon IJ Printer Utility dialog box. (1) Select Applications from the Go menu, and then double-click the Utilities folder. (2) Double-click the Printer Setup Utility icon.
  • Page 59 Print Head Cleaning starts when the POWER lamp starts blinking green. Do not perform any other operations until the Print Head Cleaning finishes. This takes about 50 seconds. (5) Read the message and click Print Check Pattern to print the nozzle check pattern. The nozzle check pattern is printed.
  • Page 60: Print Head Deep Cleaning

    Printing Maintenance Print Head Deep Cleaning If print quality does not improve by standard Print Head Cleaning, try Print Head Deep Cleaning, which is a more powerful process. Note that cleaning the Print Head causes waste ink to be absorbed in the waste ink absorber. Print Head Deep Cleaning consumes more ink than standard Print Head Cleaning, so perform this procedure only when necessary.
  • Page 61 (5) When the confirmation message is displayed, click OK. Print Head Deep Cleaning starts when the POWER lamp starts blinking green. Do not perform any other operation until the Print Head Deep Cleaning finishes. This takes about 90 seconds. Print the nozzle check pattern to check the Print Head condition. “Printing the Nozzle Check Pattern”...
  • Page 62 Printing Maintenance Ensure that the printer is on. Open the Canon IJ Printer Utility dialog box. (1) Select Applications from the Go menu, and then double-click the Utilities folder. (2) Double-click the Printer Setup Utility icon. When using Mac OS X v.10.2, double-click the Print Center icon.
  • Page 63 Print Head Deep Cleaning starts when the POWER lamp starts blinking green. Do not perform any other operation until the Print Head Deep Cleaning finishes. This takes about 90 seconds. Print the nozzle check pattern to check the Print Head condition. “Printing the Nozzle Check Pattern”...
  • Page 64: Aligning The Print Head

    Printing Maintenance Aligning the Print Head This operation must be carried out when using the printer for the first time. Aligning the Print Head positions allows you to print without shifts in the color registration. Print head alignment is performed either automatically or manually. This section deals with automatic Print Head alignment only.
  • Page 65 It takes about four minutes to complete printing. Do not open the Top Cover while printing. Clicking Check Setting prints the current settings and finishes the print head alignment. Check the printed pattern. If the pattern is printed as shown below, the Print Head is aligned automatically. The printer is now ready to use.
  • Page 66 With the printer on, load a sheet of Letter-sized plain paper in the Auto Sheet Feeder. Open the Canon IJ Printer Utility dialog box. (1) Select Applications from the Go menu, and then double-click the Utilities folder. (2) Double-click the Printer Setup Utility icon.
  • Page 67 Check the printed pattern. If the pattern is printed as shown below, the Print Head is aligned automatically. The printer is now ready to use. If the pattern is not printed successfully, refer to “Eleven flashes” in “Handling Error Messages” If results of Automatic Print Head Alignment are not satisfactory, refer to “Routine Maintenance”...
  • Page 68: Troubleshooting

    Troubleshooting Troubleshooting This section provides troubleshooting tips for the most common printing problems. Troubleshooting usually falls into one of the following categories. “Cannot Install the Printer Driver” “Cannot Connect to PC Properly” “Print Results Not Satisfactory or Contains Errors” “Troubleshooting Printer Hardware” “Paper Does Not Feed Properly”...
  • Page 69: Cannot Install The Printer Driver

    Cannot Install the Printer Driver Problem Possible Cause Cannot Install the Installation Printer Driver procedure not followed correctly Other applications (including anti-virus software) running in the background Installation does not start automatically when Setup Software & User’s Guide CD- is inserted into the drive Unable to proceed beyond the Printer...
  • Page 70: Cannot Connect To Pc Properly

    Troubleshooting Cannot Connect to PC Properly Problem Possible Cause Printing Speed Is Your environment is Slow / USB 2.0 not fully compatible Hi-Speed with USB 2.0. Connection Does Not Work Your environment is not fully compatible When you with USB 2.0. connect to a computer running Windows...
  • Page 71: Print Results Not Satisfactory Or Contains Errors

    Print Head is misaligned Paper loaded wrong side up Incorrect paper type Glossy photo paper other than the Canon specialty media is used Print Quality is not set properly Try This Open the Top Cover and check if all ink tank lamps are lit.
  • Page 72 Setting. 3. Drag the Print Quality slide bar to Fine end. Use High Resolution Paper, Photo Paper Pro or other Canon specialty paper to print images that have high color saturation. On the Main tab of the printer driver, ensure that the Media Type selected matches the paper loaded.
  • Page 73 When the Prevent paper abrasion check box is selected in the printer properties dialog box (Windows) or selected from Custom Settings in the Canon IJ Printer Utility dialog box (Macintosh), the setting is also applied under direct printing with the digital camera.
  • Page 74: Troubleshooting Printer Hardware

    Troubleshooting Troubleshooting Printer Hardware Problem Possible Cause Printer Does Not Ink tank is empty Start or Printer Stops During Print Jobs Ink tank is not installed in the correct position Ink tank is not fully inserted If the ink tank lamp is flashing fast, ink is empty. Replace the ink tank and close the Top Cover.
  • Page 75 Restart your computer. It may solve the problem. Delete an undesired print job, if there is any. Use Canon IJ Status Monitor in Windows or Printer Setup Utility (or Print Center) in Macintosh for the deletion. 1. Open the printer properties dialog box.
  • Page 76: Paper Does Not Feed Properly

    Troubleshooting Paper Does Not Feed Properly Problem Possible Cause Paper Does Not Inappropriate paper Feed Properly type is used Paper Feed Roller is dirty Paper is loaded incorrectly Check to see if the paper you are printing on is too thick or curled. “Print Media to Avoid”...
  • Page 77: Paper Jams

    Paper Jams Problem Possible Cause Paper Jams Paper jams in the Paper Output Slot/ Auto Sheet Feeder Remove the paper according to the following procedure. 1. Slowly pull the paper out, either from the Auto Sheet Feeder or from the Paper Output Slot, whichever is easier.
  • Page 78 Troubleshooting Problem Possible Cause Paper Jams Landscape Credit Card-sized Paper Jams inside the Printer Landscape 4" x 6" / 101.6 x 152.4 mm size paper loaded in the Cassette jams inside the printer You cannot load Credit Card-sized paper in the landscape orientation. Remove the paper following the procedure below.
  • Page 79 Problem Possible Cause Paper Jams Paper jams inside the printer (Transport Unit) Remove the paper according to the following procedure. 1. Open the Rear Cover. 2. When you can see the jammed paper, slowly pull the paper out. Be careful not to touch the components inside the printer. If you cannot pull the paper out, turn the printer off and turn it back on.
  • Page 80 Troubleshooting Problem Possible Cause Paper Jams Paper jams inside the printer (Duplex Transport Section) Remove the paper according to the following procedure. 1. Remove the Cassette. If the paper is loaded in the Auto Sheet Feeder, remove the paper from the Auto Sheet Feeder and close the Paper Support.
  • Page 81: Handling Error Messages

    Before the waste ink absorber becomes completely full, contact the Customer Care Center. (You will need to replace a particular part of the printer.) Canon recommends that you call for service as soon as this error occurs. Once the waste ink absorber becomes completely full, printing cannot be performed until the Waste ink tank is replaced.
  • Page 82 An ink tank that was once empty is installed. Replace the ink tank. Printing under the situation may damage the Print Head. Canon shall not be liable for any printer malfunction or damage caused by refilled ink tanks. If you want to continue printing with the refilled ink tank installed, press and hold the RESUME/CANCEL button for at least 5 seconds, and then release it.
  • Page 83: An Error Message Appears On The Screen

    3. Open the File menu and select Properties. 4. Click the Ports tab (or the Details tab) to confirm the port settings. A USB port is selected if either USBnnn (Canon iP5200) or MPUSBPRNnn (Canon iP5200) (where n is a number) is indicated.
  • Page 84 The Printer List opens. 2. Ensure that the iP5200 is selected in the Printer List. If iP5200 is not displayed in the Printer List, click Add to add the printer. For details, refer to the Printer Setup Utility Help in the Mac Help.
  • Page 85: Cannot Print Properly From The Digital Camera

    Problem Possible Cause A specified period of time has elapsed “Error No.: 2001” without receiving a response from the digital camera/The digital camera or digital video camcorder connected is not compatible with this printer Automatic Print Head alignment “Error No.: 2500” failed Cannot Print Properly from the Digital Camera The following are the possible errors that may occur when printing directly from a digital still...
  • Page 86 “Replacing an Ink Tank” Install the appropriate ink tank. Replace the ink tank. Printing under the situation may damage the Print Head. Canon shall not be liable for any printer malfunction or damage caused by refilled ink tanks. If you want to continue printing with the refilled ink tank installed, press and hold the RESUME/CANCEL button for at least five seconds, and then release it.
  • Page 87 Troubleshooting PictBridge or Canon Bubble Jet Direct compatible digital cameras can be connected to your printer for direct printing. This section describes errors that are indicated on Canon-brand PictBridge- or Bubble Jet Direct-compatible cameras. The error messages and operations may vary depending on the camera you are using.
  • Page 88: Appendix

    Printing Photographs Directly from a Canon Bubble Jet Direct Compatible Digital Camera Let’s take a look at the media types that can be set on the Canon Bubble Jet Direct compatible digital camera connected to this printer and their limitations.
  • Page 89 Appendix The digital camera does not support the following functions: - Print quality setting - Printer maintenance Images other than Exif may not be index-printed.
  • Page 90: Specifications

    Max Speed (Custom Setting 5): 24 ppm Standard: 11.7 ppm 203.2 mm max. (8.0 inches) (for Borderless Printing: 215.9 mm / 8.5 inches) Canon extended mode 42 KB USB 2.0 Hi-Speed / Direct Print Port * All operations are not guaranteed for computers standard- equipped with a USB 2.0 Hi-Speed interface.
  • Page 91 Compatible Paper Layout Print Effect DPOF Functions Direct Print Port (Connect a iP5200-compatible digital camera or digital video camcorder using the USB cable supplied with the camera.) iP5200-compatible digital cameras and digital video camcorders Card #1 (Photo Paper Pro 4" x 6"/101.6 x 152.4 mm) Card #2 (Photo Paper Plus Glossy, Photo Paper Plus Semi- gloss, or Glossy Photo Paper 4"...
  • Page 92 Default (Off: No trimming), On (follow camera’s setting), Off Default (ExifPrint), On, Off, “VIVID”*, “NR” (Noise Reduction)*, “VIVID+NR”*, “Face“* * If using a Canon PictBridge-compatible camera, you can select it. Default (Off: No printing), Date, File No., Both, Off...
  • Page 93 Available hard-disk space for printer driver installation Windows XP/Windows 2000: 100 MB Windows Me/Windows 98: 15 MB Canon IJ Status Monitor cannot be used under the following conditions: - When sharing this printer on a network (Windows Me, Windows 98)
  • Page 94: Safety Precautions

    Appendix Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use your printer safely. Do not attempt to use printer in any way not described in this manual. You may cause an electric shock, fire or damage the printer if you ignore any of these safety precautions.
  • Page 95 You may cause injury or damage the printer if you ignore any of these safety precautions. Choosing a location Do not install the printer in a location that is unstable or subject to excessive vibration. Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source.
  • Page 96: Regulatory Information

    Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza...
  • Page 97: Canon U.s.a., Inc. Limited Warranty

    CANON U.S.A., INC. LIMITED WARRANTY --- (USA Only) The limited warranty set forth below is given by Canon U.S.A., Inc. ("Canon USA") with respect to the new or refurbished Canon-brand product ("Product") packaged with this limited warranty, when purchased and used in the United States only.
  • Page 98 One Canon Plaza Lake Success, NY 11042 Canon is a registered trademark of Canon Inc. ©2005 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may also be a registered trademark in other countries.
  • Page 99: Index

    Cannot Print Properly from the Digital Camera... 81 Canon IJ Printer Utility dialog box (Macintosh)... 49 Canon IJ Status Monitor (Windows) ... 71 CANON U.S.A., INC. LIMITED WARRANTY --- (USA Only).. 93 Cleaning ... 53, 54 CLI-8BK Black... 37 CLI-8C Cyan... 37 CLI-8M Magenta...
  • Page 100 Print Results Not Satisfactory or Contains Errors... 67 Printer Driver Setting for Media Type ... 19 Printer Properties dialog box ... 21, 35, 47 Printing Photographs Directly from a Canon Bubble Jet Direct Compatible Digital Camera ... 84 Printing Photographs Directly from a PictBridge Compliant Device ...
  • Page 103: Ordering Information

    © 2005 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may be a registered trademark or trademarks in other countries. All other product and brand names are trademarks of their respective owners. As an E partner, Canon U.S.A., Inc.
  • Page 104 Quick Start Guide Canon U.S.A., Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon Canada, Inc. 6390 Dixie Road, Mississauga, Ontario, L5T 1P7, Canada Canon Latin America, Inc. 703 Waterford Way, Suite 400, Miami, FL 33126, U.S.A.

Table of Contents