Cleaning And Care; Troubleshooting - Silvercrest SSE 6 B2 Operation And Safety Notes

Cleaning and care

product in water.
Note: If no longer use, clean the empty soap/hand disinfectant
container by rinsing it with clean water. Fill the soap/hand disin-
2
fectant container
times to remove the soap completely. The product may get damaged
if the soap is not removed completely.
R emove the batteries from battery compartment
outside surface and battery compartment
U se a slightly moist, fluff-free cloth and a mild detergent to remove
stubborn dirt.
D o not use corrosive cleaning agents. These substances may dam-
age the basic material of the product.

Troubleshooting

= Problem
= Cause
= Remedy
T he soap, washing-up liquid or hand disinfectant liquid
is dispensed slower than usual from the soap /hand
disinfectant outlet
The batteries are too weak.
Replace the batteries (see "Inserting/Replacing the batteries").
Water has entered the battery compartment
Allow the battery compartment
batteries (see "Inserting/Replacing the batteries").
DANGER OF EXPLOSION! Do not immerse the
with clean water and repeat this step several
2
or the product does not work.
4
7
by using dry, fluff-free cloth.
7
.
7
to dry completely. Insert new
7
and clean the
GB 15