Advertisement
6255 comes partially pre-assembled. Unfold the legs and attach the support bar.
Support Bar
Fasten bolt with washer and nut
Attaching The Table
Place the table on the inside of the leg posts
Lay table top horizontal onto support leg
with lip and slide bolt through to secure
Line up the holes
Support Bar
This is how it should look once
the support bar is attached.
Align the holes and slide bolt
through leg posts and table
Slide the bars with the washers
into the holes on table top
Slide bolt through support bar and leg
Fasten with nut and washer
and repeat with the other side
Repeat this step with the other
three bars with washers
Advertisement
