Modeling Flash - Sony HVL-MT24AM Operating Instructions Manual

Macro twin flashkit
Hide thumbs Also See for HVL-MT24AM:
Table of Contents

Advertisement

Available languages

Available languages

Modeling flash

You can try continuous flash to check for shadows on the subject before shooting.
The flash will fire for two seconds at a rate of 40 flashes per second.
1
Press the TTL/M/Test button to turn on the modeling-flash
lamp
.
Each time the TTL/M/Test button is pressed to change the TTL and M lamp
be sure to check that the appropriate lamp is on. (See page 33 for the display
sequence.)
2
Press the TEST button (test/modeling flash button) .
 Do not press the shutter button while the flash is in use.
 The strength of shadows will differ from that during actual photography.
 When using the flash in a bright place or outdoors or when using a bounce
flash, shadows are lighter so verification is more difficult.
1

Advertisement

Table of Contents
loading

Table of Contents