Press the + or – button to select the power level to set.
• The power level can be selected from the following.
1/1, 1/2, 1/4, 1/8, 1/16, 1/32
• For details on setting the power level, refer to page 44.
• When the shutter button is pressed partway down, the distance where
the proper exposure will be obtained will appear in the data panel.
• The flash
indicator is not displayed after a photo is taken with
• Using custom functions, manual flash may be selected without setting
the camera in the M mode (p. 53).
Proper exposure is obtained at less than 1.5 m.
Proper exposure is obtained at more than 28 m.
Continued on the next page