Table of Contents
Advertisement
Self-diagnosis
display/Warning
indicators
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
You may hear a melody when some
warning indicators appear on the screen.
C:04:
The battery pack is not an "InfoLITHIUM"
battery pack (V series). Use an
"InfoLITHIUM" battery pack (V series)
(p. 15).
Connect the DC plug of the AC Adaptor to the
DC IN jack of your camcorder securely (p. 15).
C:06:
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13: / C:32:
Remove the power source. Reconnect it and
operate your camcorder again.
E::
Follow the steps from on page 61.
The battery pack is nearly used up.
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
No memory card is inserted (p. 21).
When the indicator flashes, there are not
enough free spaces for recording images.
Delete unnecessary images (p. 42), or format
the memory card after storing the images on
other media (p. 59).
The image data base file may be damaged.
Check the data base file by selecting
[Setup] [
Media Settings] [Repair
Img. DB F.] the recording medium (HDR-
CX210E).
The memory card is damaged.
Format the memory card with your camcorder
(p. 59).
Incompatible memory card is inserted (p. 22).
The memory card is write-protected.
Access to the memory card was restricted on
another device.
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
The recording medium is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
GB
Hide quick links:
Advertisement
Table of Contents
