Setup 1
1
The default settings are marked with
LCD Backlight
Selects the brightness of the LCD backlight when using the camera with batteries.
Bright
Normal
• You can change the setting by pressing DISP button longer.
• Selecting [Bright] uses up the battery charge faster.
Beep
Selects the sound produced when you operate the camera.
Shutter
On
Off
Language
Selects the language to be used to display the menu items, warnings, and messages.
Initialize
Initializes the setting to the default setting.
Images stored in the internal memory are retained.
1 Select [OK] with v on the control button, then press z.
The message "Initialize all settings Ready?" appears.
2 Select [OK] with v, then press z.
The settings are reset to the default setting.
To cancel the resetting
Select [Cancel] in step 1 or 2, then press z.
• Make sure that the power is not disconnected during resetting.
54
For details on the operation 1 page 46
.
Brightens
Turns on the shutter sound when you press the shutter button.
Turns on the beep/shutter sound when you press the control
button/ press the shutter button.
Turns off the beep/shutter sound.