Settings For The Sound (Audio Setup) - Sony DVP-NS38 Operating Instructions Manual

Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the sound
according to the playback and connection
conditions.
Select "AUDIO SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 59).
The default settings are underlined.
AUDIO SETUP
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
AUDIO DRC (Dynamic Range Control)
(DVDs only)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to "AUDIO DRC."
This function affects the output from the
following jacks:
– LINE (RGB)-TV jack
– DIGITAL OUT (COAXIAL) jack only
when "DOLBY DIGITAL" is set to "D-
PCM" (page 64).
STANDARD Normally, select this position.
TV MODE Makes low sounds clear even if
you turn the volume down.
WIDE
Gives you the feeling of being
RANGE
at a live performance.
Switches the method for mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see "Checking the
audio signal format" (page 38). This function
affects the output of the following jacks:
– LINE (RGB)-TV jack
– DIGITAL OUT (COAXIAL) jack when
DOLBY
SUR-
STANDARD
ROUND
DOLBY SURROUND
ON
D-PCM
PCM
NORMAL
OFF
48kHz/16bit
Selects if audio signals are output via the
DIGITAL OUT (COAXIAL) jack.
ON
OFF
DOWNMIX (DVDs only)
"DOLBY DIGITAL" is set to "D-PCM"
(page 64).
Normally, select this position.
Multi-channel audio signals are
output to 2 channels for enjoying
surround sounds.
Multi-channel audio signals are
downmixed to 2 channels for use
with your stereo.
DIGITAL OUT
Normally, select this position. When
you select "ON," see "Setting the
digital output signal" for further
settings (page 64).
The influence of the digital circuit
upon the analogue circuit is minimal.
63
,continued