Name
Function
W 2CH/
Press to select a sound field
A.DIRECT
(page 101) or to switch the
audio of the selected input to
analog signal without any
adjustment (page 101).
X SHIFT
Press to light up the button to
activate the buttons with pink
printing.
Y TV
Press to light up the button to
enable the TV operation
(buttons with yellow printing).
Z THEATRE
Press to enjoy optimal image
suited for movies and to output
the sound from the speakers
connected to this receiver
automatically.
Note
This button will only function if
your TV is compatible with
Theater Mode.
Refer to the operating
instructions supplied with the
TV for details.
wj RM SET UP Press to set up the remote.
a)
See the table on page 103 for information on the
buttons that you can use to control each
component.
b)
The TV/5, N and PRESET +/TV CH+ buttons
have tactile dots. Use the tactile dots as references
when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.