Sony STR-DA3300ES Operating Instructions Manual page 91

Name Function
C INPUT
Lights up constantly. One of
the input indicators also
lights up according to the
current input.
D AUTO
Lights up when INPUT
MODE is set to "Auto".
E HDMI
Lights up when the receiver
recognizes a component
connected via an HDMI IN
jack.
F DMPORT
Lights up when DIGITAL
MEDIA PORT adapter is
connected and "DMPORT"
is selected.
G 96/24
Lights up when the receiver
is decoding DTS 96/24 (96
kHz/24 bit).
H COAX
Lights up when INPUT
MODE is set to "Auto" and
the source signal is a digital
signal being input through
the COAXIAL jack.
I OPT
Lights up when INPUT
MODE is set to "Auto" and
the source signal is a digital
signal being input through
the OPTICAL jack.
J ANALOG
Lights up when INPUT
MODE is set to "Auto" and
no digital signal is being
input through the
COAXIAL or OPTICAL
jacks, or when INPUT
MODE is set to "Analog,"
or when the "2ch Analog
Direct" is being used.
K MULTI IN
Lights up when multi-
channel input is selected.
L D.RANGE
Lights up when dynamic
range compression is
activated.
M RDS
Lights up while receiving
RDS information.
Name Function
N EQ
Lights up when the
equalizer is activated.
O D.C.A.C.
Lights up when auto
calibration is activated.
P SLEEP
Lights up when the sleep
timer is activated.
Q L.F.E.
Lights up when the disc
being played back contains
an L.F.E. (Low Frequency
Effects) channel and the
L.F.E. channel signal is
actually being reproduced,
the bars underneath the
letters light up to indicate
the level. Since the L.F.E.
signal is not recorded in all
parts of the input signal the
bar indication will fluctuate
(and may turn off) during
playback.
R ;DIGITAL
Lights up when the receiver
(EX) is decoding Dolby Digital
Surround signals. When the
receiver is decoding Dolby
Digital Surround EX
signals, ";DIGITAL EX"
also lights up. When
playing a Dolby Digital
format disc, be sure that you
have made digital
connections and that
INPUT MODE is not set to
"Analog".
continued
91 GB