Sony KDS-55A2000 Operating Instructions Manual page 18

Additional operations
To Do this
Press TV "/1.
Switch off the TV
temporarily
(standby mode)
Press 1 on the TV (front).
Switch off the TV
Note
To disconnect the TV completely,
pull the plug from the mains.
Press %. Press 2 +/- to adjust
Switch on the TV
without sound from the volume.
standby mode
Press 2 + (increase)/
Adjust the volume
- (decrease).
Mute the sound Press %. Press again to restore.
Access the Press
Programme index channel, press
table (in analogue
mode only) To access the Input signal index
table, see page 23.
To access Digital Text
Many broadcasters provide a Digital Text service.
Digital Text offers graphically rich contents,
compared to Analogue Text.
Select a digital channel which provides Digital Text,
then press /.
When a broadcaster provides a dedicated Digital Text
channel, select this channel to access Digital Text.
To navigate through Digital Text, follow the
instructions on the screen.
To exit Digital Text, press RETURN.
To move around, press
To select items, press
To access shortcuts, press the coloured buttons.
To access Analogue Text
In analogue mode, press /. Each time you press /,
the display changes cyclically as follows:
Text and TV picture t Text t No Text (exit the
Text service)
To select a page, press the number buttons or
To hold a page, press
To reveal hidden information, press
To jump a page, press
three digit pages).
Tips
• Ensure that the TV is receiving a good signal, or some text
errors may occur.
• Most TV channels broadcast a Text service. For information
on the use of the service, select the index page.
• When four coloured items appear at the bottom of the Text
page, Fastext is available. Fastext allows you to access
pages quickly and easily. Press the corresponding
coloured button to access the page.
18
GB
. To select an analogue
F f
/ , then press
.
F f G g
/ / / .
and the number buttons.
/ .
/ .
F f
and / , then press
To freeze the picture – Picture freeze
You can freeze the current picture to make a note of a
telephone number or recipe.
1
Press
The frozen picture is displayed on the right of the
screen. You can watch a moving picture on the
left.
2
Press
mode.
To change the screen format manually to
suit the broadcast
Press repeatedly to select Smart, 4:3, Wide,
Zoom, or 14:9.
Smart*
Displays conventional 4:3 broadcasts with an
imitation wide screen effect. The 4:3 picture is
stretched to fill the screen.
4:3
Displays conventional 4:3 broadcasts (e.g. non-wide
screen TV) in the correct proportions.
Wide
Displays wide screen (16:9) broadcasts in the correct
proportions.
/
.
(for
.
again to return to normal TV