Table of Contents
Advertisement
If a clog prevents the normal flow of air to the canister motor, the thermal protector
turns the motor off automatically to allow the motor to cool in order to prevent
possible damage to the vacuum cleaner.
To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or
clean/replace filters.
Replace full bag if necessary.
Wait approximately thirty (30) minutes, plug vacuum cleaner in, turn on to see if
thermal protector has reset.
Edge Cleaner
Thermal Protector
- 34 -
Active brush edge cleaners are on
both sides of the Power Nozzle.
Guide either side of the Power Nozzle
along base-boards or next to
furniture to help remove dirt trapped
at carpet edges.
Hide quick links:
Advertisement
Table of Contents
