Changing The Unit's Settings; Common Procedures; Summary Of Settings - Panasonic SC-RT50 Operating Instructions Manual

Changing the unit's settings

DRIVE SELECT
Numbered
buttons
, , ,
ENTER
SRD MUSIC

Summary of settings

The settings remain intact even if you switch the unit to standby.
Tabs
Signal Source (RF IN) (Setup Guide ➡ page 13)
Channel
Set Channels Automatically (Setup Guide ➡ page 13)
Preset Channel Captions*
Manual Channel Captions*
Setup Off Timer
Select how long the unit remains on when it is not being used.
This has no effect when "FM", "AM", "AUX", "F MUSICP", or "R
MUSICP" is selected as the source.
Remote Control Code (Setup Guide ➡ page 15)
Clock Settings
Press [ENTER] to show the following settings.
Set Clock Automatically (Setup Guide ➡ page 13)
Set Clock Manually (Setup Guide ➡ page 15)
Adjust Time Zone*
Quick Start
If you set Quick Start to on, you can start recording to DVD-
RAM about 1 second after you press [ ] to turn the unit on and
then sequentially press [
Restore Default Settings
This returns all values in the Setup menus, except for the clock,
channel settings, ratings level, and on-screen language, to the
default settings.
* 1 You can set these menus only after "Set Channels Automatically" is completed.
* 2 You can set this menu only after "Set Clock Automatically" is completed.
THEATER
RETURN
SETUP
Menus
(Setup Guide ➡ page 14)
1
(Setup Guide ➡ page 14)
1
(Setup Guide ➡ page 15)
2
REC].

Common procedures

Preparation
Press [THEATER] to switch the remote control to operate this unit.
Press [DRIVE SELECT] to select the DVD or SD drive.
1
While stopped
Press [SETUP].
Options
Tabs Menus
Setup
Signal Source (RF IN) Cable TV
Set Channels Automatically
Channel Captions
Channel
Preset Channel Captions
Setup
Manual Channel Captions
Disc
Video
A di
2
Press [ , ] to select the tab and
press [ ].
3
Press [ , ] to select the menu and
press [ENTER].
4
Press [ , ] to select the option and
press [ENTER].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [SETUP].
[Note]
There may be differences in operation methods. If this happens,
follow the on-screen instructions for the operation.
Options (Underlined items are the factory presets.)
Antenna CableTV
2 Hours 6 Hours Off
Set Code 1 Set Code 2
1 0
On Off
The following happens when you have selected "On".
Power consumption in standby mode increases because
power is supplied to the unit.
Yes No
Set Code 3
1
RQT8655
37