Table Of Contents; Accessory Information - Panasonic DMP-BD30K Operating Instructions Manual

Blu-ray disc™ player with sd card slot dmp-bd30k operating manual (english, spanish)
Table of Contents

Advertisement

Table of contents

Accessory information ..................................... 3
Disc and card information................................ 4
Connection ........................................................ 6
Control reference guide.................................... 9
Easy Setting..................................................... 10
operation........................................................ 10
Chapter playback ............................................ 14
Playing still pictures ....................................... 14
Playing music .................................................. 16
Showing FUNCTIONS menu........................... 16
") ....................................... 17

Accessory information

Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
(Product numbers correct as of September 2007. These may be subject to change.)
Only for U.S.A.: To order accessories, refer to "Accessory Purchases" on page 30.
Only for Canada: To order accessories, call the dealer from whom you have made your purchase.
1 Remote control
(N2QAYB000184)
(ONLY FOR U.S.A. )
Product Registration Card
Please complete and return the included product registration card, or register via the Internet at: http://www.prodreg.com/panasonic/
The enclosed Canadian French label sheet corresponds to the English display on the front and back side of the unit.
Using remote control
Batteries
Insert so the poles (i and j) match those in
the remote control.
When closing the lid, insert it from the j
(minus) side.
R6/LR6, AA
≥Do not use rechargeable type batteries.
≥Batteries shall not be exposed to excessive
heat such as direct sunlight, fire or the like.
≥Do not mix old and new batteries.
≥Do not use different types at the same time.
≥Do not heat or expose to flame.
≥Do not take apart or short circuit.
TM
1 Audio/Video cable
(K2KA6BA00003)
≥Do not attempt to recharge alkaline or
manganese batteries.
≥Do not use batteries if the covering has been
peeled off.
Mishandling of batteries can cause electrolyte
leakage which can damage items the fluid
contacts and may cause a fire.
Remove batteries if the remote control is not
going to be used for a long period of time.
Store in a cool, dark place.
Getting started
11 Table of contents/Accessory information
menu ....................................................18
Changing the unit's settings.......................... 20
Frequently asked questions........................... 23
Troubleshooting guide ................................... 24
Messages ......................................................... 27
Disc and card handling................................... 27
Maintenance .................................................... 27
Specifications.................................................. 28
Glossary........................................................... 29
Product Service............................................... 31
Index................................................................. 33
2 Batteries
for remote control
Use
If you cannot operate the unit or other
equipment using the remote control after
changing the batteries, please re-enter the
codes (
.............................32
1 AC power supply cord
(K2CB2CB00022)
≥For use with this unit only. Do not use
it with other equipment.
Also, do not use cords for other
equipment with this unit.
Remote control signal sensor
20˚
20˚
30˚
30˚
7 m (23 feet) directly
in front of the unit
10, 26).
RQT9037
(ENG)
3

Advertisement

Table of Contents
loading

Table of Contents