Fujitsu Plasmavision PDS5001 User Manual page 27

• Adjusting Contrast (Contrast)
Any value between -30 and +30 can be selected.
: Higher contrast
: Lower contrast
Press to store.
• Adjusting Screen Brightness (Brightness)
Any value between -60 and +60 can be selected.
: Brighter screen
: Darker screen
Press to store.
• Adjusting Color Darkness (Color)
Any value between -60 and +60 can be selected.
: Darker colors
: Lighter colors
Press to store.
• Adjusting Tint (Tint)
Any value between -30 and +30 for [
: More greenish colors
: More purplish colors
Press to store.
• Adjusting picture Sharpness (Sharpness)
Any value between -16 and +16 can be selected.
: Sharper pictures
: Less sharp pictures
Press to store.
• Making gamma correction(Gamma)
You can use this option to make a dynamic gamma correction suitable for still or motion pictures.
Each time you press or , one of the available choices appears in the following sequence:
Dinamic1, 2, 3, 4:Suitable for watching a motion picture.(Use either of better picture quality.)
Static: Suitable for watching a still picture.
Press to store.
* Can select Static only in RGB mode.
• Adjusting Color Temperature (Color Temp.)
Use or to specify a desired color temperature. Each time you press
Warm: More reddish colors
Standard:Standard color temperature
Cool: More bluish colors
User: User Color Temp. setup
• Setting User Color Temp. (User Color Temp.)
Can set up when User is selected in Color Temp.
Press or to select Red, Green or Blue and press
of 0 to 255.
* Color Temp. setup is switched to User. The initial value of User Color Temp. is adjusted
individually at the factory.
Setting Noise Reduction (Noise Reduction)
Can select the noise reduction setting corresponding to the noise level of the input signal.
Each time you press or ,one of the available choices appears in the following sequence:
Off: Noise reduction does not function.
Min.: Weak setting
Std.: Standard setting
Max.: Strong setting
*Some type of signal can not be selected.
], and -60 and +60 for [ ] can be selected.
or
or to make adjustment in the range
, one of the available choices appears in the following sequence:
User Color Temp.adjustment screen
25