Fujitsu Stylistic LT LT Installation Manual

FMWCC41
Slipcase

Installation Guide

Stylistic LT
These instructions provide details on using the
FMWCC41 slipcase. This case is designed for use
with the Stylistic LT pen tablet. The slipcase
provides added protection when transporting,
using, or storing the pen tablet.
Note: Prior to installing your pen tablet in the
slipcase, be sure to install a screen protector on
the screen. It is difficult to install a screen
protrector once the system is in the slipcase.
To install your pen tablet into the slipcase, open
the top flap of the slipcase. The flap is secured by
three snaps and a Velcro
Snaps
Figure 1. Stylistic LT Slipcase - Rear
Stylistic LT is a trademark of Fujitsu Personal Systems, Inc. © 1999 Fujitsu Personal Systems, Inc.
6/99
strip (see Figure 1).
®
Slide the pen tablet into the case, bottom first, with the
screen facing the open window (see Figure 2). Reattach
the flap on the top of the slipcase.
Pen
Holder
Figure 2. Stylistic LT Slipcase - Front
To adjust the fit of the hand straps on the back of the
case, peel apart the two Velcro
comprising each strap. Adjust the length of the strap by
peeling the strap away from the flap and adjusting it to
the desired length.
To secure the shoulder strap, attach the strap clips to
two of the D-rings. The slipcase can be carried
vertically or horizontally, depending on how you orient
the clips.
D-ring
(4 places)
backed flaps
®-
58-0683-00A