Stylistic St5000 Series Specifications; Processing Specifications; Memory/Storage Specifications; Display Specifications - Fujitsu Stylistic 5020 User Manual

Stylistic ST5000 Series Hardware Specifications
The following table provides general hardware specifica-
tions of the Stylistic ST5000 Series Tablet PC by category.
Stylistic ST5000 Specifications

Processing Specifications

CPU Intel® Pentium® M Processor ULV
733*
Chip set Intel 855GME - 400 MHz FSB
Processor 1.1 GHz*
Speed

Memory/Storage Specifications

Main RAM • 2 DIMM slots available
• 200-pin SO DIMM modules
• 256 MB, 512 MB, and 1 GB
module configurations available,
with a system maximum of 2 GB.
L1 cache 32 KB on-die
(CPU)
L2 cache 2 MB on-die
1 MB (FWH)
BIOS ROM
Hard disk • 2.5" HDD
drive
• Minimum 40 GB IDE HDD*
• ATA 100
• 4200 or 5400 rpm*
• Shock-mounted

Display Specifications

Depending on the configuration of your system, it has
either a 12.1" transmissive or a 10.4" reflective display
12.1" • Transmissive Color LCD
Display
• Active Digitizer
• 16-bit color
• 12.1" TFT XGA (1024 x 768),
16M colors
• Brightness: 8 levels
• Viewing Angle:
Horizontal: 80 degrees (min.)
Vertical: 80 degrees (min.)
• Contrast Ratio: Typ. 250, Min. 100
* The specifications for your particular model may vary.
To determine the specifications for your system, please
visit our Web site at: http://us.fujitsu.com/computers.
S y s t e m S p e c i f i c a t i o n s
Stylistic ST5000 Specifications (Continued)
10.4" • Reflective Color LCD
Display
• Active Digitizer
• Outdoor-viewable
• 16-bit color
• 10.4" TFT XGA (1024 x 768),
16M colors
• Brightness: 8 levels
VRAM Intel 855GME chipset with 8MB
shared memory using Unified Memory
Architecture (UMA) delivers low-
power, high-performance 3D/2D
graphics, video, and display
capabilities. Dynamic Video Memory
Technology (DVMT) dynamically
responds to application requirements
and efficiently allocates the proper
amount of memory (64 MB max.) for
optimal graphics and system
performance.

Physical Specifications

Dimensions 12.1" Display (Active Digitizer):
8.66" w x 12.77" d x 0.82"-0.88" h
(220 mm x 324.4 mm x 20.9-22.3
mm)
10.4" Display (Reflective Digitizer):
8.66" x 12.76" x 0.91"-0.98"
(220 mm x 324.1 mm x 23.0-24.9
mm)
Weight 3.5 lbs. (1.59 Kg) (with battery)

Interface Specifications

Card Slots • PCMCIA: One Type I or Type II,
PCMCIA CardBus version 3.0
• Secure Digital (SD)/
Memory Stick slot
• Smart Card slot
Integrated • Modem (RJ-11)
Interfaces
• LAN (RJ-45)
• IEEE 1394 (S400 4-pin)
• USB 2.0 (Qty. 2)
• DC-In
• IrDA
• 15-pin D-SUB connector for
external VGA monitor
• Docking connector
Infrared IrDA version 1.1 (FIR, 4Mbps)
39