Table of Contents
Advertisement
L i f e B o o k T S e r i e s T a b l e t P C
IrDA Port Configuration Submenu of the Advanced Menu
The IrDA Port Configuration submenu provides the
ability to set the I/O addresses and interrupt levels for
the infrared ports of your tablet.
To prevent IRQ and address conflicts,
■
avoid changing the default settings. If
you must change the settings, you can
call 1-800-8Fujitsu for technical assis-
tance.
■
The BIOS will warn you of resource con-
flicts by placing a yellow asterisk next to
each device that is in conflict.
All I/O addresses in Table 5 are in hexa-
■
decimal.
Infrared Port:
Mode:
I/O Address:
Interrupt:
I/O Address:
DMA Channel:
F1
Help
ESC
Exit
PhoenixBIOS Setup Utility
Advanced
IrDA Port Configurations
[Enabled]
[FIR]
[2E8-2EF]
[IRQ 6]
[400-43F]
[DMA 3]
Select Item
-/Space
Select Menu
Enter
Figure 5. IrDA Port Configuration Submenu
I/O addresses, DMA channels, and
Interrupt levels can be entered in various
ways, including via the BIOS setup utility,
the control software for the I/O device, or
the hardware. If any two ports or devices
have the same I/O address assigned your
tablet will not function normally. Please
keep a record of original settings before
making any changes in the event that a
restoration is required. See your hardware
and software documentation as well as the
setup utility to determine settings,
limitations, etc.
Item Specific Help
[Disabled]
The port is disabled.
[Enabled]
The port is enabled
with user configuration.
[Auto]
Plug & Play OS
configure the port.
Change Values
F9
Select
Sub-Menu
F10
12
Setup Defaults
Save and Exit
Advertisement
Table of Contents
