20-INCH | 48-VOLT MAX* | LED LIGHTS OPERATOR’S MANUAL Model 24V-X2-20SB-CT-RM A Division of Snow Joe , LLC ® Form No. SJ-24V-X2-20SB-CT-RM-880E-MR2-V2 IMPORTANT! WARNING! Always disengage the switch lever and remove the battery packs before making any adjustments, Safety Instructions inspecting, servicing, changing accessories, cleaning the snow blower, or when any other dangerous conditions are present.
NOTE: This unit is tool only. The batteries and the charger are iii) Repair any damage before restarting and operating not included. They must be purchased separately. the snow blower. Model 24V-X2-20SB-CT-RM is compatible with the 24V Electric Safety iON+ System batteries and chargers. See page 17 for more information.
Page 4
® ® 9. If the battery packs suffer overloading and overheating, 1-866-SNOWJOE (1-866-766-9563) for assistance. the integrated protective cutoff will switch off the • Battery chemicals cause serious burns – Never let a equipment for safety reasons. If this situation happens, damaged battery pack contact the skin, eyes or mouth.
® ® ® 6. Protect batteries from overheating. Overloads, customer service center at 1-866-SNOWJOE overcharging and exposure to direct sunlight will result (1-866-766-9563). in overheating and cell damage. Never charge or work 3. Electrical plugs must match the outlet. Never modify with batteries that have been overheated –...
Page 6
® ® ® i) SHUT THE MOTOR OFF! Sun Joe customer service center at 1-866-SNOWJOE ® ii) Wait 10 seconds to be sure the impeller blades have (1-866-766-9563) for assistance. stopped rotating. • Noise control – When using the snow blower, respect iii) Always use a clean-out tool, not your hands.
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand WARNING! Do not expose the and follow all instructions in the unit to rain or wet conditions.
Page 8
Save this manual for future reference. SOLD SEPARATELY Battery + Charger options available at snowjoe.com 24VBAT 24VBAT-XR 24VCHRG-QC 24VCHRG-DPC 1. Handle bar 8.
Stages ..............Single stage System. See page 17 for battery and charger options and Type of Snow ............Light, fluffy specifications, or for more information visit snowjoe.com. Directional Control ........ 180º auto-rotate chute LED Light ..............3 W each WARNING! The cordless snow blower can only be Tire Size ..............
In order to operate this cordless snow blower you will need two batteries and one charger from the 24V iON+ System. See page 17 for battery and charger options and 24VCHRG-QC specifications, or for more information visit snowjoe.com. quick charger (Sold separately) WARNING! Charge only 24V iON+ lithium-ion battery packs with their compatible 24V iON+ lithium-ion charger.
Page 11
IMPORTANT! Never allow the battery packs to become 3. Follow the same instructions above to fit and secure the fully discharged as this will cause irreversible damage to upper handle frame onto the middle handle frame with the the batteries. other latch + threaded connector set (Fig.
Discharge Chute Assembly Fig. 11 1. Slide the discharge chute assembly into position, as shown. Align the bottom of the discharge chute assembly Middle with the 3 tabs on the machine (Fig. 8). handle frame Fig. 8 Discharge chute assembly Chute crank rod Tabs...
System. See page 17 for battery and charger options and inspection of the area since some objects may be hidden specifications, or for more information visit snowjoe.com. from view by surrounding snow. If the snow blower hits an obstruction or picks up a foreign object during use, 1.
Page 14
Changing Throw Direction and Throw Height Fig. 16 WARNING Never direct the snow discharge chute at the operator, Pattern A at bystanders, at vehicles, or at nearby windows. The discharged snow and foreign objects accidentally picked up by the snow thrower can cause serious damage and personal injury.
You can purchase a replacement auger blade (Model 24V-X2-20SB-AUGER) and other genuine replacement parts IMPORTANT: Only use original replacement parts specified for by visiting us online at snowjoe.com or calling our toll-free this snow blower. customer service helpline at 1-866-SNOWJOE You can purchase a replacement scraper bar (Model (1-866-766-9563).
Snow Joe + Sun Joe ® ® ® customer service center at 1-866-SNOWJOE (1-866-766-9563) for assistance. 3. Clean the snow blower before storing or transporting. Be sure to secure the unit while transporting. Metal plate 4. Remove the batteries from the cordless snow blower before storing.
Do not store in damp locations where corrosion of terminals may occur. As with other battery If your Snow Joe 24V-X2-20SB-CT-RM cordless snow blower ® pack types, permanent capacity loss can result if the pack requires service or maintenance, please call the...
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®...
Page 19
@snowjoe. • Wearing parts like belts, augers, chains and tines are not covered under this warranty. Wearing parts can be EXPORTS: purchased at snowjoe.com or by calling 1-866-SNOWJOE Customers who have purchased Snow Joe + Sun Joe ®...
Need help?
Do you have a question about the 24V-X2-20SB-CT-RM and is the answer not in the manual?
Questions and answers