Fujitsu Lifebook N3510 Bios Manual page 6

L i f e B o o k N S e r i e s N o t e b o o k B I O S
Main Menu -> IDE Settings Submenu – Setting the timing and ATI/ATAPI Device
The IDE Settings submenu of the Main menu allows you
to select a speed for the hard disk drive, which device(s)
to use, and whether to support SMART functions.
ings
Master : FUJITSU
HDD Timing
( ) Standard
rsion : x.xx
( ) Fast PIO
te : xx/xx/xx
te : ( ) xx/xx/xx Multiword DMA
ea : E000h - FFFFh
( ) Ultra ATA-33
( ) Ultra ATA-66
(
) Ultra ATA-100
sor Password Is :
ssword Is :
Master Password Is :Clear
nformation Is :
Table 4: Fields, Options and Defaults for the IDE Settings Submenu
Note that the parameters listed in the following table may vary depending upon your system's configuration.
Menu Field Options
IDE Settings HDD Timing:
Standard
■
■ Fast PIO
■ Multiword DMA
Ultra ATA-33
■
■ Ultra ATA-66
■ Ultra ATA-100
Select Devices:
■ Primary Master Device
■ Primary Slave Device
Secondary Master
■
Device
■ Secondary Slave Device
S.M.A.R.T. Support:
■ Disabled
■ Enabled
6
IDE Settings
MHT2100AT
A DVD-RAM UJ-831S
SELECT DEVICES
[
[
[
[
Clear
S.M.A.R.T.
Clear
OK
Clear
Figure 4. IDE Settings Submenu
Default
[Ultra ATA-100)
[Primary Master Device/
Secondary Master Device]
[Disabled]
The following figure shows the IDE Settings submenu.
CPU
Speed :
] PRIMARY MASTER DEVICE
] PRIMARY SLAVE DEVICE
] SECONDARY MASTER DEVICE
] SECONDARY SLAVE DEVICE
Memory
Support
Total :
Cancel
Slot 1 :
Slot 2 :
Description
Select the timing for the hard drive or select [Stan-
dard] to disable the feature. If the hard drive cannot
support a selected speed, it will choose the next one
(Figure 4)
available.
Selects the ATA/ATAPI device(s) to use.
Enables or disables the SMART function, which per-
forms such services as self-monitoring and analysis.
(Figure 4)
L2 Cache :
Disabled
51
25
25
(Figure 4)