Initial Firing Instructions - Traeger TFB88PUB Owner's Manual

INITIAL FIRING INSTRUCTIONS

Countdown
to Traeger'ing.
Probe 1
Probe
Probe 2 Selector
1
Remove the porcelain-coated grill
grates, grease drain pan, and heat
baffle from the inside of the grill.
3
Make sure there are no foreign objects
in the auger. Turn the switch ON (I)
and the temperature dial to SMOKE.
Make sure the auger is turning (inside
the pellet hopper).
10
66103_PRO15_v10.indd 10
To be used on initial firing or anytime the grill runs out
of pellets. In order to ensure proper operation of the grill, you
must first allow the auger tube to be "charged" with pellets.
Smoke
Shut Down
Cycle
Power
Probe 1
Probe
Probe 2 Selector
375
High
OFF
ON
2
With the switch in the OFF (O)
position, plug the power cord into an
appropriate grounded electrical outlet.
4
Check that there is air movement from
the draft inducer fan by placing your
fingers over the firepot. If the hot rod
is getting hot, it will turn red.
CAUTION! Do not touch the hot rod.
Turn the temperature dial to
SHUT DOWN CYCLE.
Probe 1
Probe
Probe 2 Selector
11/12/15 11:30 AM