Installing And Removing A Color Lid - Fujitsu Lifebook A6220 User Manual

Installing a color lid
Color lids are attached to connections on the the top of the display cover and adjacent to the cover hinges.
•
U
SE CARE WHEN INSTALLING OR REMOVING A COLOR LID
INJURY
•
W
HEN INSTALLING OR REMOVING A COLOR LID
CORRESPONDING NOTCH ON YOUR
A HOOK BECOMES BROKEN
•
D
O NOT USE EXCESSIVE FORCE WHEN PRESSING DOWN ON THE ATTACHMENT POINTS
COULD RESULT IN DAMAGE TO YOUR DISPLAY
•
D
O NOT EXPOSE THE COLOR LID TO HIGH TEMPERATURES
TEMPERATURES
•
W
HEN YOU CLEAN A COLOR LID
CHEMICALS OR OTHER VOLATILE MATERIALS WHICH COULD DAMAGE YOUR COLOR LID
To install a color lid :
1
Attach a color lid to your PC by lying it flat against the back of the display and aligning the two hooks with the
corresponding notches located in front of the display hinges. (The notch locations are shown in Figure 26.)
2
There are four hooks along each side and four along the front edge. Attach the side hooks first, starting from
the hinge edge, by pressing gently at the hook location.
3
Attach the front hooks, starting from the outside edges.
Removing a color lid
1
Unhook the front edge of the lid first, starting with the two inside hooks.
2
Unhook the sides of the lid, starting with the front ones and moving back.
3
Remove the lid by unlatching the two hooks from the hinge notches.
.
,
THE COLOR LID SHOULD NOT BE USED ON YOUR
.
,
WIPE IT GENTLY WITH A DRY
66 - Color Lid for LifeBook
;
THE EDGES ARE SHARP AND MAY CAUSE
,
ALIGN EACH HOOK OF THE COLOR LID TO ITS
PC. I
F NOT ALIGNED CORRECTLY
.
;
IT MAY BE DAMAGED BY HIGH
,
,
THE HOOK MAY BE BROKEN
PC.
;
DOING SO
. N
CLEAN CLOTH EVER USE ANY
.
. I
F