Table of Contents
Advertisement
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through
The Setup Utility on page 1 for more information.)
Main
QuickBoot Mode:
Boot-time Diagnostic Screen:
Preboot Execution Environment:
Boot Device Priority
F1
Help
ESC
Exit
Table 13: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
QuickBoot Mode:
Disabled
Enabled
Boot-time
Disabled
Diagnostic Screen:
Enabled
Preboot Execution
Disabled
Environment:
Enabled
Boot Device
Selects the Boot
Device Priority
Priority
submenu
PhoenixBIOS Setup Utility
Advanced
Security
Select Item
-/Space
Enter
Select Menu
Figure 13 Boot Menu
Default
[Enabled]
[Disabled]
[Disabled]
—
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
Power Savings
Boot
[Enabled]
[Disabled]
Allows the system to
[Disabled]
skip certain tests
while booting. This
will decrease the
time needed to boot
the system.
Change Values
Select
Sub-Menu
Description
Turns on and off booting with a truncated set of Power On Self
Test. (Fewer tests mean faster turn on.)
Turns on and off display of test results instead of Fujitsu logo screen
during Power On Self Test.
When enabled, allows you to boot from a network server. To
change boot device priority, exit the BIOS, then re-enter the BIOS.
This menu allows setting up the source for the operating system.
S e c u r i t y M e n u
Info
Exit
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
23
Advertisement
Table of Contents
