Table of Contents
Advertisement
2.4
ELECTRICAL SAFETY
1. Have a qualified electrician connect power to the
machine.
2. Keep electrical wires and connections in good
repair.
3. Maintain a dry working area.
2.5
INSTALLATION SAFETY
1. Use only a hoist, crane or forklift with sufficient
lifting capacity and stability to handle the
machine.
2. Have 2 men available to maneuver the unit when
lifting, moving or installing.
3. Have a qualified electrician connect power to the
machine.
2.6 STORAGE SAFETY
1. Store the
Stationnary Vertical Mixer
level surface
2. Store away from areas of human activity.
3. Do not permit children to play on or around the
stored machine.
2.7
SAFETY DECALS
1. Keep safety decals and signs clean and readable
at all times.
2. Replace safety decals and signs that are missing
or have become illegible.
3. Replaced parts that displayed a safety sign
should also display the current sign.
4. Safety decals or signs are available from your
Dealer Parts Department or the factory.
How to install Safety DecaIs :
*
Be sure that the installation area is clean
and dry.
*
Decide on the exact position before you
remove the backing paper.
*
Remove the smallest portion of the split
backing paper.
*
Align the decal over the specified area and
carefully press the small portion with the
exposed sticky backing in place.
on a firm,
*
Slowly peel back the remaining paper and
carefully smooth the remaining portion of
the decal in place.
*
Small air pockets can be pierced with a pin
and smoothed out using the piece of decal
backing paper.
5
Advertisement
Table of Contents
